Belt conveyors
Continuous-action elevators and conveyors for goods or materials, belt type, other than for underground use. Belt conveyors for mining surface operations, aggregates, agriculture, food processing, parcels and warehousing.
Of every $100 of this product Canada exports, about $84 goes to the United States.
- Advantage (RCA)
- 2.1x
- Rules to check
- Medium
The opportunity in brief
Canada exported C$95 million of belt conveyors in January to September 2026, down about 49 percent on 2025, a sharp drop, with 84 percent going to the US. Non-US sales rose about 16 percent, led by Australia at C$8.0 million, Türkiye at C$2.8 million and Spain at C$1.2 million.
Outside the US, buyers imported US$2.8 billion in 2024, growing about 2 percent a year, led by Germany, Mexico, India, Indonesia and China. Canada holds about 3.4 percent of Mexico's market and under 1 percent in the others. Conveyors are machinery, so EU buyers need CE marking and a declaration of conformity, and the EU moves to the new Machinery Regulation on 20 January 2027. In our reading, slow demand growth makes this a contest for market share rather than a rising market.
Is this your product?
Everything on this page is measured at the 6-digit HS level, the most detailed level shared by every country. Check where your product sits in the HS tree before you use the figures below.
- Chapter 84Machinery and mechanical appliances, boilers, nuclear reactors; parts thereof
- Heading 8428Lifting, handling, loading or unloading machinery; n.e.c. in heading no. 8425, 8426 or 8427 (e.g. lifts, escalators, conveyors, teleferics)
- Subheading 8428.33Elevators and conveyors; continuous-action, for goods or materials, belt type, n.e.c. in item no. 8428.20 or 8428.31
Not quite your product? Other codes under heading 84289 other subheadings
- 8428.10Lifts and skip hoists In this monitor →
- 8428.20Elevators and conveyors; pneumatic
- 8428.31Elevators and conveyors; continuous-action, for goods and materials, specially designed for underground use, n.e.c. in item no. 8428.20
- 8428.32Elevators and conveyors; continuous-action, for goods or materials, bucket type, n.e.c. in item no. 8428.20 or 8428.31
- 8428.39Elevators and conveyors; continuous-action, for goods or materials, n.e.c. in item no. 8428.20, 8428.31, 8428.32 or 8428.33 In this monitor →
- 8428.40Escalators and moving walkways
- 8428.60Teleferics, chair-lifts, ski-draglines, traction mechanisms for funiculars
- 8428.70Industrial robots
- 8428.90Lifting, handling, loading or unloading machinery; n.e.c. in heading no. 8425, 8426, 8427 or 8428 In this monitor →
The national codes under HS 8428.33
Below 6 digits each country sets its own lines, so the same product has a different code in Canada, the EU and the UK. Figures on this page cover all of them together.
Not split further: use 8428.33.00.
Source: Statistics Canada, 2026.
Not split further: use 8428.33.00.
Source: Canada Border Services Agency, T2026-2, effective 2026-09-01.
Not split further: use 8428 33 00.
Source: Combined Nomenclature, CN 2026.
Not split further: use 8428 33 00 00.
Source: UK Integrated Online Tariff (UK Trade Tariff), Live nomenclature as of 2026-11-21.
HS chapter, heading and subheading descriptions are the UN Comtrade short forms of the HS 2022 nomenclature, not the legal text. The customs authority of the importing country decides the final classification; if you are unsure, ask your customs broker or request a binding ruling (in the EU, Binding Tariff Information).
How hard is this product to export?
Five scores from 1 to 5, built from the data and verified rules on this page. They are a starting guide, not a verdict for your specific product. How the scores work
Regulatory Complexity
Entry requirements in the main EU and UK markets and Canadian export rules.
- CE or UKCA marking or declaration of conformity
Logistics Feasibility
Shelf life, cold chain, hazards, bulk, value per kg and distance to the main buyers.
- Bulky or out-of-gauge freight
- High value per kg: Canada's exports average about US$20 per kg, which absorbs freight costs
- Main buyers are far (about 9,100 km on average)
Market Accessibility
Tariff advantage, trade agreement coverage, competition, the price gap between Canada's US sales and the main markets, and Canada's existing footprint.
- Little or no tariff advantage in the EU and UK
- 61% of non-US demand is in markets with a Canadian free trade agreement
- Canada's price on sales to the US is about the same as what the three largest markets pay on average per kg (median), so ocean freight would come out of the margin
- Canada holds 0.74% of non-US demand
Opportunity
Size, growth and Canadian penetration of demand outside the US.
- Smaller non-US demand (US$2.8 billion)
- Slow growth (about 2% a year since 2020)
Diversification Urgency
How pressing it is for Canadian exporters of this product to find buyers beyond the US. It measures US exposure, not how fast a market must be entered.
- 84% of Canada's exports go to the US
- Exports down 49% year to date
- US tariff exposure: medium. Belt conveyors carry a 15% Section 232 rate as fixed industrial equipment when metal is at least 15% of weight. There is no CUSMA exemption.
Who you would compete with
61% of non-US demand for this product is in countries where a Canadian free trade agreement is in force. Canadian goods of this code sold to the US at about US$21.99/kg in 2024, before freight.
| Market | Main suppliers | Canada's share | Market avg import price | Canada's US price vs market | Canada's price there now |
|---|---|---|---|---|---|
| Germany | Japan 18%, Poland 16%, Austria 11% | 0.19% | US$21.33/kg | About equal | Too little volume |
| Mexico | US 27%, China 19%, Germany 14% | 3% | n/a | n/a | n/a |
| India | China 65%, South Korea 16%, Viet Nam 5% | none | US$21.99/kg | About equal | Not sold |
How to read the price columns
Canada's US price vs market compares what Canadian goods of this code sell for in the US per kilogram (US customs value, before international freight) with the average price per kilogram the market pays its other suppliers (usually including freight to its border). Fifteen percent or more below the average leaves room to absorb ocean freight and is shown in blue; 30 percent or more above means sales would rely on quality or specification and is shown in pink; in between, freight will squeeze margins and the gap does not move the score. It is not the price a buyer would pay for an identical item: one HS code covers products of different grades, and exchange rates have moved since 2024.
Canada's price there now is shown only where Canada already holds at least 1% of the market and US$500,000 of sales. Smaller flows are often samples, spare parts or one-off orders and give misleading prices.
UN Comtrade 2024, imports reported by each market and by the US. How the price gap works
What it costs to reach these markets
What moves the cost of selling into each market compared with selling to the US: the exchange rate, the import duty and the cost of freight and insurance, for Canada and for the main competitors. For comparison, freight and insurance on Canadian goods of this kind shipped to the US come to about 0.8% of their value.
| Market | Canadian goods since 2024 | Landed cost vs market (October 2026) | Canada: duty | Canada: freight and insurance | Main competitors: duty, freight |
|---|---|---|---|---|---|
| Germany | EUR: 6% cheaper | About equal (+2%) exchange rate -6.4%, freight +6.2%, duty +0% vs competitors +0% | 0% | 5.8% (US: 0.8%) |
|
| Mexico | MXN: 2% cheaper | n/a | 0% under CUSMA (if the goods meet its rules of origin; other suppliers' duties not covered yet) | 5.9% (US: 0.8%) |
|
| India | INR: 11% dearer | 19% above exchange rate +10.6%, freight +7.9%, before duty | Not covered yet | 7.3% (US: 0.8%) |
|
How to read this table
Canadian goods since 2024 shows how the Canadian dollar has moved against the market's currency between the 2024 average and the October 2026 average: "6% cheaper" means a price fixed in Canadian dollars now costs buyers there about 6% less than in 2024.
Landed cost vs market answers one question: if you shipped the goods you sell to the US today, at the same price, to this market, would they cost buyers more or less at the border than what they pay other suppliers? It starts from Canada's price per kilogram on US sales, adds freight and insurance to this market and Canada's import duty, applies the exchange-rate change since 2024, and compares the result with the market's average import price from other suppliers plus the duty they pay (weighted by their shares; zero inside the EU). The line under each figure shows the parts. Within 10% either way reads as about equal. Below the average means you can match local prices and still cover freight; above means you would need to sell on quality, specification or service, or accept a lower price than in the US. One HS code covers products of different grades, so a higher figure can also mean Canada sells a higher-value version. Where duties are not covered yet, both sides are compared before duty. Anti-dumping and similar duties apply only to some companies, tariff lines or quantities, so they are kept out of the main figure. Where Canada or a main competitor faces one, a second line shows the worst case: each origin pays its highest ad valorem remedy rate on top of its duty.
Duties are the lowest rate each origin can claim on the national tariff lines under this HS code, shown as a range where lines differ. Canada's rate assumes the goods meet the agreement's rules of origin (CETA in the EU, the Canada-UK agreement in the UK) and are declared with a valid origin statement; otherwise the MFN rate applies. Tariff quotas and end-use relief are not included. Anti-dumping and similar duties often apply only to some products or companies: check the exact line. In Mexico, goods that meet the CUSMA rules of origin enter duty free; we do not yet cover the duties Mexico charges other suppliers, so the landed cost there is compared before duty. Duties for other markets outside the EU and UK are not covered yet.
Freight and insurance is the OECD's estimate of what it cost in 2024 to move goods of this kind (HS heading 8428) from each supplier to the market, as a share of their value at the border. Compare Canada's figure with the US figure to see the extra cost of an overseas market, and with competitors' figures to see who is closer. These are averages across all shipments of the heading, not quotes: your own cost depends on volume, packaging, lane and season. Trade inside the EU is recorded without freight, so it is shown as not measured.
Sources: Bank of Canada exchange rates (CZK, PLN and IDR from ECB reference rates; SAR from its US dollar peg); European Commission, Access2Markets (TARIC data); UK Integrated Online Tariff (trade-tariff.service.gov.uk); OECD International Transport and Insurance Costs of merchandise trade (ITIC), 2024. Duties checked 2026-11-21. How we measure costs
Why it matters now
Belt conveyors carry a 15% Section 232 rate as fixed industrial equipment when metal is at least 15% of weight. There is no CUSMA exemption.
- Section 232 (steel derivatives, fixed industrial equipment): 15% total duty floor (general rate is Free, so 15% additional) (all lines (8428.33.00), where steel or aluminum is at least 15% of weight). Source
- Section 301: 10% (only goods not covered by Section 232), CUSMA-compliant goods exempt. Source
US measures change often. Check current CBP guidance or a licensed customs broker before shipping.
- US duty on goods that qualify under CUSMA: up to 15%. Goods that do not qualify, or ship without a valid origin certification, pay 10% more.
- To keep your US buyer's cost unchanged you would have to cut your price by about 13%.
- Best alternative: Germany. Selling there at the price it pays other suppliers beats any US price cut larger than about 2%. The US stays the better market only if your buyer there pays at least 84% of the tariff. Replacing 25% of Canada's US sales would take about 18% of Germany's imports.
- Held back to "it depends": the US duty here is Section 232, which most other suppliers to the US pay too, so US prices for this product tend to rise and the cut you need is likely smaller.
A rule of thumb, not advice: it assumes you sell in the alternative market at the price it pays other suppliers and ignores the cost of finding buyers there. The share of the tariff your US buyer will pay is something only you can know from your negotiations. How the threshold works
How big is demand outside the US?
Imports of HS 842833 by every reporting country except the United States and Canada, in current US dollars.
Which countries import the most, and how much comes from Canada?
| Market | Imports | From Canada | Canada's share |
|---|---|---|---|
1Germany | US$210m | US$402k | 0.19% |
2Mexico | US$182m | US$6m | 3.4% |
3India | US$133m | none reported | 0% |
4Indonesia | US$133m | US$576k | 0.43% |
5China | US$129m | US$754k | 0.59% |
6Thailand | US$110m | none reported | 0% |
7France | US$106m | US$3k | <0.01% |
8UK | US$96m | US$435k | 0.46% |
9Australia | US$86m | US$5m | 6.4% |
10Netherlands | US$78m | US$59k | <0.1% |
What each market reports importing in 2024, in US dollars. "From Canada" includes Canadian goods shipped on through the US, so it can be higher than Canada's own export figures, such as the year-to-date sales at the top of the page, which count those goods as sales to the US.
Pink is the part supplied by Canada; the rest comes from other countries.
Canada's combined share of these 10 markets (US$14m of US$1.3bn imported).
The same markets, ranked by how promising they look for Canadian sellers: size and growth of demand, trade agreements, Canada's existing sales, price, distance and room for volume. 5 promising, 1 hard. Pink points count against a market, blue for it.
- 1Mexico4/5 · Strong candidate
- Takes 6.6% of non-US demand
- Imports growing about 15% a year since 2020
- Canadian free trade agreement in force (CPTPP, CUSMA)
- Canada already supplies 3.4% of this market
- Price not compared: this market reports no import weights
- Close to Canada: about 3,300 km
- Small next to Canada's US sales: a quarter of them would be 21% of its imports
- 2Australia4/5 · Strong candidate
- Takes 3.1% of non-US demand
- Imports growing about 12% a year since 2020
- Canadian free trade agreement in force (CPTPP)
- Canada already supplies 6.4% of this market
- Price not compared: this market reports no import weights
- Far from Canada: about 15,600 km
- Small next to Canada's US sales: a quarter of them would be 44% of its imports
- 3Netherlands4/5 · Strong candidate
- Takes 2.8% of non-US demand
- Imports growing about 17% a year since 2020
- Canadian free trade agreement in force (CETA)
- Canada supplies under 0.2% of this market
- Canada's US price is about 62% below what it pays others per kg
- Small next to Canada's US sales: a quarter of them would be 49% of its imports
- 4Germany4/5 · Strong candidate
- Takes 7.6% of non-US demand
- Imports growing about 9.3% a year since 2020
- Canadian free trade agreement in force (CETA)
- Canada supplies under 0.2% of this market
- Canada's US price is about the same as what it pays others per kg
- 5UK4/5 · Strong candidate
- Takes 3.4% of non-US demand
- Imports growing about 18% a year since 2020
- Canadian free trade agreement in force (Canada-UK TCA)
- Canada supplies 0.5% of this market
- Canada's US price is about the same as what it pays others per kg
- Small next to Canada's US sales: a quarter of them would be 40% of its imports
Canada's competitive position
Above 1 means Canada specialises in it.
Countries that reported imports from Canada.
Revealed comparative advantage (RCA) for Canada in HS 842833 is 2.1: this product makes up 2.1 times the share of Canada's exports that it makes up of world trade. Values above 1 indicate a specialisation. In 2024, 34 non-US markets reported imports of this product from Canada.
In Jan to Sep 2026, Canada exported C$95m of this product (-49.4% on the same period of the previous year), of which C$79m went to the United States. The largest non-US destinations were Australia (C$8m), Türkiye (C$3m), Spain (C$1m), Netherlands (C$1m).
Navy goes to the United States; blue goes to every other market.
| Year | To the world | To the US | US share |
|---|---|---|---|
| 2025 | US$165m | US$152m | 92% |
| 2024 | US$201m | US$185m | 92% |
| 2023 | US$243m | US$220m | 91% |
| 2022 | US$202m | US$176m | 87% |
| 2021 | US$162m | US$142m | 88% |
| 2020 | US$140m | US$125m | 90% |
Tariffs and rules to check
Check product by product. Demand data shows where buyers are, not whether your specific product can enter a market. Rules, standards and certification differ by product, by market and over time. Use the official sources below and confirm with the importing country's authority or a licensed customs broker before you ship.
CE marking under the machinery rules is mandatory and the EU regime changes on 20 January 2027, but there are no border certificates.
Both the EU third-country duty and the UK Global Tariff are 0% for belt conveyors of 8428 33, so Canadian-origin goods enter duty free with or without CETA. UK rates apply under the Canada-UK Trade Continuity Agreement. Preferential rates apply only when the goods meet the agreement's rules of origin and the origin statement is in order.
On the Canadian side
- No CFIA or permit requirement is typical for belt conveyors; the main Canadian step is the CBSA export declaration for non-US shipments of CAD 2,000 or more. Source
In the main buyer markets
- Conveyors are machinery: Directive 2006/42/EC applies until 20 January 2027, and EU buyers need an EU declaration of conformity and CE marking (or a declaration of incorporation for partly completed machinery). Source
- The Machinery Regulation (EU) 2023/1230 replaces Directive 2006/42/EC and applies from 20 January 2027; machinery placed on the EU market before that date must comply with Directive 2006/42/EC. Source
- UK (GB): the Supply of Machinery (Safety) Regulations 2008 cover machinery, safety components and partly completed machinery, and recognition of CE marking on the GB market was extended from 1 October 2024. Source
- Heading 8428 is not listed in Annex I of the CBAM Regulation (EU) 2023/956, which covers iron and steel goods only up to chapter 73 and aluminium goods of chapter 76, so no CBAM reporting applies to these conveyors. Source
Look up your exact case
- EU Access2Markets: HS 842833 from Canada to GermanyEuropean Commission tool: tariff under CETA, rules of origin, product requirements and taxes for any EU country. Pick the 8-digit line for your product.
- UK Trade Tariff: HS 842833UK government tariff: duty for Canadian origin under the UK-Canada agreement, import controls and documents.
- Canada Tariff FinderGovernment of Canada tool comparing tariffs Canadian exporters face under each free trade agreement, for markets beyond Europe.
- WTO ePing: new rules on "belt conveyors"Notifications of new technical regulations and food safety measures from WTO members. Sign up for alerts on your product.
Where to find Canadian producers
Looking for a Canadian supplier of this product, or benchmarking competitors? These public directories let you search Canadian companies.
- Government of Canada: directories of Canadian companiesHub of federal and sector directories for finding Canadian manufacturers and suppliers.
- Canada's Business Registries searchLook up a named Canadian company's registration details across participating registries.
- Trade Commissioner ServiceFree help from Canada's trade commissioners abroad, including market intelligence and qualified contacts.
Edition history
How this product looked in each quarterly edition of the monitor.
| Edition | Canada exports (YTD) | US share | Non-US demand | Brief |
|---|---|---|---|---|
| Q3 2026 | C$95m (Jan to Sep 2026) | 84% | US$2.8bn (2024) | Read |
Need a second market for belt conveyors?
Three ways we can help, depending on where you are in the decision.
Our verdict on up to two markets you choose: worth a closer look, or a clear reason to rule it out now, with the codes, duties and rules behind it.
Order a briefNames of companies importing 8428.33 goods in the market you choose, with their import activity and decision-maker contacts, as a report and CSV.
Find importersWe will shortlist the three most promising markets beyond the US, starting from the largest importers (Germany, Mexico and India), with the rules to meet and a landed-cost comparison.
Request a studyFree guides: how to score a market and the real landed cost of exporting.
More products in the Q3 2026 edition
Questions
How dependent are Canada's belt conveyors exports on the United States?
In the Q3 2026 edition of the Canada Export Opportunity Monitor, 84% of Canada's exports of HS 842833 went to the United States (Jan to Sep 2026, Statistics Canada).
Which countries import the most belt conveyors outside the US?
Outside the United States, the largest importers of HS 842833 in 2024 were Germany, Mexico, India. Total non-US imports were US$2.8bn (UN Comtrade).
What rules apply when exporting belt conveyors from Canada?
CE marking under the machinery rules is mandatory and the EU regime changes on 20 January 2027, but there are no border certificates. Requirements differ by product and market, so check the official sources linked on this page and confirm with the importing country's authority or a licensed customs broker before shipping.
Sources: UN Comtrade (2020 to 2024; Canada annual 2020 to 2025), Statistics Canada (Canada January to September 2026). Mirror statistics reported by importers can differ from Canada's own export figures. Values are in current dollars, so growth includes price changes. This page is general information, not legal or customs advice. See the methodology.
Get each new edition of the Export Opportunity Monitor
Once a quarter we refresh the data, add products and send a short brief on what changed for Canadian exporters. Free, no account needed.
Your next market starts with insight.
Fresh opportunities, delivered every quarter.