Forklift and works truck parts
Parts suitable for use solely or principally with machinery of heading 8427 (fork-lift trucks and other works trucks fitted with lifting or handling equipment). Parts for forklifts and other lift trucks, such as masts, forks, carriages, attachments, counterweights and hydraulic assemblies.
Of every $100 of this product Canada exports, about $96 goes to the United States.
- Advantage (RCA)
- 1.4x
- Rules to check
- Low
The opportunity in brief
Canada exported C$184 million of forklift and works truck parts in January to September 2026, down about 16 percent on 2025, with 96 percent going to the US. Non-US sales fell about 42 percent. The UK was the largest non-US buyer at C$1.8 million, followed by Mexico at C$1.5 million and Hungary at C$1.1 million.
Outside the US, buyers imported US$5.4 billion in 2024, growing about 9 percent a year, led by Germany, France, Mexico, Italy and Czechia. Canada already supplies about 12 percent of Mexico's market but almost nothing in Europe. In the EU, plain replacement parts need no CE marking of their own, but attachments sold separately and parts that perform a safety function need conformity assessment and CE marking. In our reading, Mexico is the proven market, while Europe is most open for plain parts.
Is this your product?
Everything on this page is measured at the 6-digit HS level, the most detailed level shared by every country. Check where your product sits in the HS tree before you use the figures below.
- Chapter 84Machinery and mechanical appliances, boilers, nuclear reactors; parts thereof
- Heading 8431Machinery parts; used solely or principally with the machinery of heading no. 8425 to 8430
- Subheading 8431.20Machinery; parts of the machinery of heading no. 8427
Not quite your product? Other codes under heading 84317 other subheadings
- 8431.10Machinery; parts of the machinery of heading no. 8425
- 8431.31Lifts, skip hoists or escalators; parts thereof
- 8431.39Machinery; parts of the machinery of heading no. 8428, (other than lifts, skip hoists or escalators) In this monitor →
- 8431.41Machinery parts; buckets, shovels, grabs and grips, for the machinery of heading no. 8426 and 8430
- 8431.42Machinery parts; bulldozer or angledozer blades
- 8431.43Boring or sinking machinery; parts for boring or sinking machinery of subheading 8430.41 or 8430.49
- 8431.49Machinery; parts of machines handling earth, minerals or ores and n.e.c. in heading no. 8431
The national codes under HS 8431.20
Below 6 digits each country sets its own lines, so the same product has a different code in Canada, the EU and the UK. Figures on this page cover all of them together.
Not split further: use 8431.20.00.
Source: Statistics Canada, 2026.
Not split further: use 8431 20 00.
Source: Combined Nomenclature, CN 2026.
- Chassis and hydraulics for hand pallet trucks:
- 8431 20 00 11Consigned from Thailand
- 8431 20 00 19Other
- 8431 20 00 40Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 8427
- 8431 20 00 50Chassis and hydraulics, with a so-called ‘weight indication system’ consisting of a weighing mechanism not integrated in the chassis, that is to say not integrated in the forks
- 8431 20 00 60Pre-assembled or ready-to-assemble sections of self-propelled mobile access equipment designed for the lifting of persons, excluding individual components when presented separately
- 8431 20 00 70Container spreader for lifting empty 20' and 40' cargo containers: without an integrated carriage, suitable for machines with a load capacity of not more than 11 000 kg, designed to carry one or two containers at a time, with a top or side mounting, with an anti-corrosion layer coated, with a weight of 3 200 kg or more but not more than 4 000 kg for use in the manufacture of self-propelled container handlers
- 8431 20 00 80Other
Source: UK Integrated Online Tariff (UK Trade Tariff), Live nomenclature as of 2026-11-21.
HS chapter, heading and subheading descriptions are the UN Comtrade short forms of the HS 2022 nomenclature, not the legal text. The customs authority of the importing country decides the final classification; if you are unsure, ask your customs broker or request a binding ruling (in the EU, Binding Tariff Information).
How hard is this product to export?
Five scores from 1 to 5, built from the data and verified rules on this page. They are a starting guide, not a verdict for your specific product. How the scores work
Regulatory Complexity
Entry requirements in the main EU and UK markets and Canadian export rules.
- No product-specific entry requirements identified
Logistics Feasibility
Shelf life, cold chain, hazards, bulk, value per kg and distance to the main buyers.
- High value per kg: Canada's exports average about US$13 per kg, which absorbs freight costs
- Main buyers about 5,800 km away on average (transatlantic)
Market Accessibility
Tariff advantage, trade agreement coverage, competition, the price gap between Canada's US sales and the main markets, and Canada's existing footprint.
- Tariff advantage under CETA and the Canada-UK agreement (others pay up to 4%)
- 90% of non-US demand is in markets with a Canadian free trade agreement
- Canada's price on sales to the US is about 114% above what the three largest markets pay on average per kg (median), so sales there would rely on quality or specification
- Canada holds 0.88% of non-US demand
Opportunity
Size, growth and Canadian penetration of demand outside the US.
- Sizeable non-US demand (US$5.4 billion)
- Steady growth (about 9% a year since 2020)
Diversification Urgency
How pressing it is for Canadian exporters of this product to find buyers beyond the US. It measures US exposure, not how fast a market must be entered.
- 96% of Canada's exports go to the US
- Exports down 16% year to date
- US tariff exposure: high. Forklift parts (8431.20.00) pay 25% Section 232. CUSMA-qualifying goods pay 25% only on non-US content, never below 15% overall.
Who you would compete with
90% of non-US demand for this product is in countries where a Canadian free trade agreement is in force. Canadian goods of this code sold to the US at about US$11.97/kg in 2024, before freight.
| Market | Main suppliers | Canada's share | Market avg import price | Canada's US price vs market | Canada's price there now |
|---|---|---|---|---|---|
| Germany | Czechia 18%, Italy 14%, Belgium 12% | <0.1% | US$5.59/kg | 114% above | Too little volume |
| France | Belgium 33%, Italy 17%, Germany 16% | 0.14% | US$7.58/kg | 58% above | Too little volume |
| Mexico | US 36%, China 25%, Italy 13% | 12% | US$4.64/kg | 158% above | 9% above |
How to read the price columns
Canada's US price vs market compares what Canadian goods of this code sell for in the US per kilogram (US customs value, before international freight) with the average price per kilogram the market pays its other suppliers (usually including freight to its border). Fifteen percent or more below the average leaves room to absorb ocean freight and is shown in blue; 30 percent or more above means sales would rely on quality or specification and is shown in pink; in between, freight will squeeze margins and the gap does not move the score. It is not the price a buyer would pay for an identical item: one HS code covers products of different grades, and exchange rates have moved since 2024.
Canada's price there now is shown only where Canada already holds at least 1% of the market and US$500,000 of sales. Smaller flows are often samples, spare parts or one-off orders and give misleading prices.
UN Comtrade 2024, imports reported by each market and by the US. How the price gap works
What it costs to reach these markets
What moves the cost of selling into each market compared with selling to the US: the exchange rate, the import duty and the cost of freight and insurance, for Canada and for the main competitors. For comparison, freight and insurance on Canadian goods of this kind shipped to the US come to about 0.4% of their value.
| Market | Canadian goods since 2024 | Landed cost vs market (October 2026) | Canada: duty | Canada: freight and insurance | Main competitors: duty, freight |
|---|---|---|---|---|---|
| Germany | EUR: 6% cheaper | 113% above exchange rate -6.4%, freight +6.3%, duty +0% vs competitors +0% | 0% (others pay 4%) | 5.9% (US: 0.4%) |
|
| France | EUR: 6% cheaper | 57% above exchange rate -6.4%, freight +6.4%, duty +0% vs competitors +0% | 0% (others pay 4%) | 6.0% (US: 0.4%) |
|
| Mexico | MXN: 2% cheaper | 172% above exchange rate -1.9%, freight +7.6%, before duty | 0% under CUSMA (if the goods meet its rules of origin; other suppliers' duties not covered yet) | 7.1% (US: 0.4%) |
|
How to read this table
Canadian goods since 2024 shows how the Canadian dollar has moved against the market's currency between the 2024 average and the October 2026 average: "6% cheaper" means a price fixed in Canadian dollars now costs buyers there about 6% less than in 2024.
Landed cost vs market answers one question: if you shipped the goods you sell to the US today, at the same price, to this market, would they cost buyers more or less at the border than what they pay other suppliers? It starts from Canada's price per kilogram on US sales, adds freight and insurance to this market and Canada's import duty, applies the exchange-rate change since 2024, and compares the result with the market's average import price from other suppliers plus the duty they pay (weighted by their shares; zero inside the EU). The line under each figure shows the parts. Within 10% either way reads as about equal. Below the average means you can match local prices and still cover freight; above means you would need to sell on quality, specification or service, or accept a lower price than in the US. One HS code covers products of different grades, so a higher figure can also mean Canada sells a higher-value version. Where duties are not covered yet, both sides are compared before duty. Anti-dumping and similar duties apply only to some companies, tariff lines or quantities, so they are kept out of the main figure. Where Canada or a main competitor faces one, a second line shows the worst case: each origin pays its highest ad valorem remedy rate on top of its duty.
Duties are the lowest rate each origin can claim on the national tariff lines under this HS code, shown as a range where lines differ. Canada's rate assumes the goods meet the agreement's rules of origin (CETA in the EU, the Canada-UK agreement in the UK) and are declared with a valid origin statement; otherwise the MFN rate applies. Tariff quotas and end-use relief are not included. Anti-dumping and similar duties often apply only to some products or companies: check the exact line. In Mexico, goods that meet the CUSMA rules of origin enter duty free; we do not yet cover the duties Mexico charges other suppliers, so the landed cost there is compared before duty. Duties for other markets outside the EU and UK are not covered yet.
Freight and insurance is the OECD's estimate of what it cost in 2024 to move goods of this kind (HS heading 8431) from each supplier to the market, as a share of their value at the border. Compare Canada's figure with the US figure to see the extra cost of an overseas market, and with competitors' figures to see who is closer. These are averages across all shipments of the heading, not quotes: your own cost depends on volume, packaging, lane and season. Trade inside the EU is recorded without freight, so it is shown as not measured.
Sources: Bank of Canada exchange rates (CZK, PLN and IDR from ECB reference rates; SAR from its US dollar peg); European Commission, Access2Markets (TARIC data); UK Integrated Online Tariff (trade-tariff.service.gov.uk); OECD International Transport and Insurance Costs of merchandise trade (ITIC), 2024. Duties checked 2026-11-21. How we measure costs
Why it matters now
Forklift parts (8431.20.00) pay 25% Section 232. CUSMA-qualifying goods pay 25% only on non-US content, never below 15% overall.
- Section 232 (steel derivatives, mobile industrial equipment): 25% (all lines (8431.20.00), metal 15%+ of weight; CUSMA goods pay 25% on non-US content only, minimum 15%), partial CUSMA exemption. Source
US measures change often. Check current CBP guidance or a licensed customs broker before shipping.
- US duty on goods that qualify under CUSMA: 25%.
- To keep your US buyer's cost unchanged you would have to cut your price by about 20%.
- Best alternative: France. Selling there at the price it pays other suppliers beats any US price cut larger than about 36%. The US stays the better market even if you absorb the whole tariff. Replacing 25% of Canada's US sales would take about 8% of France's imports.
- Left out: Mexico, where Canada's US price and the local price per kilogram are too far apart to compare, usually a weight-reporting problem in the trade data or a different mix of products under this code.
A rule of thumb, not advice: it assumes you sell in the alternative market at the price it pays other suppliers and ignores the cost of finding buyers there. The share of the tariff your US buyer will pay is something only you can know from your negotiations. How the threshold works
How big is demand outside the US?
Imports of HS 843120 by every reporting country except the United States and Canada, in current US dollars.
Which countries import the most, and how much comes from Canada?
| Market | Imports | From Canada | Canada's share |
|---|---|---|---|
1Germany | US$873m | US$151k | <0.1% |
2France | US$636m | US$862k | 0.14% |
3Mexico | US$358m | US$42m | 11.7% |
4Italy | US$299m | US$165k | <0.1% |
5Czechia | US$260m | US$8k | <0.01% |
6Belgium | US$242m | US$31k | <0.1% |
7UK | US$234m | US$1m | 0.58% |
8Netherlands | US$219m | US$418k | 0.19% |
9Sweden | US$208m | US$34k | <0.1% |
10Spain | US$181m | US$75k | <0.1% |
What each market reports importing in 2024, in US dollars. "From Canada" includes Canadian goods shipped on through the US, so it can be higher than Canada's own export figures, such as the year-to-date sales at the top of the page, which count those goods as sales to the US.
Pink is the part supplied by Canada; the rest comes from other countries.
Canada's combined share of these 10 markets (US$45m of US$3.5bn imported).
The same markets, ranked by how promising they look for Canadian sellers: size and growth of demand, trade agreements, Canada's existing sales, price, distance and room for volume. 5 promising, 1 hard. Pink points count against a market, blue for it.
- 1Mexico4/5 · Strong candidate
- Takes 6.6% of non-US demand
- Imports growing about 55% a year since 2020
- Canadian free trade agreement in force (CPTPP, CUSMA)
- Canada already supplies 12% of this market
- Canada's US price is about 158% above what it pays others per kg
- Close to Canada: about 3,300 km
- 2Germany4/5 · Strong candidate
- Takes 16% of non-US demand
- Imports growing about 12% a year since 2020
- Canadian free trade agreement in force (CETA)
- Canada supplies under 0.2% of this market
- Canada's US price is about 114% above what it pays others per kg
- 3France3/5 · Worth a look
- Takes 12% of non-US demand
- Imports growing about 7.1% a year since 2020
- Canadian free trade agreement in force (CETA)
- Canada supplies under 0.2% of this market
- Canada's US price is about 58% above what it pays others per kg
- 4Italy3/5 · Worth a look
- Takes 5.5% of non-US demand
- Imports growing about 12% a year since 2020
- Canadian free trade agreement in force (CETA)
- Canada supplies under 0.2% of this market
- Canada's US price is about 62% above what it pays others per kg
- 5Czechia3/5 · Worth a look
- Takes 4.8% of non-US demand
- Imports growing about 8.3% a year since 2020
- Canadian free trade agreement in force (CETA)
- Canada supplies under 0.2% of this market
- Canada's US price is about 70% above what it pays others per kg
Canada's competitive position
Above 1 means Canada specialises in it.
Countries that reported imports from Canada.
Revealed comparative advantage (RCA) for Canada in HS 843120 is 1.4: this product makes up 1.4 times the share of Canada's exports that it makes up of world trade. Values above 1 indicate a specialisation. In 2024, 73 non-US markets reported imports of this product from Canada.
In Jan to Sep 2026, Canada exported C$184m of this product (-15.7% on the same period of the previous year), of which C$176m went to the United States. The largest non-US destinations were UK (C$2m), Mexico (C$2m), Hungary (C$1m), Czech Republic (C$470k).
Navy goes to the United States; blue goes to every other market.
| Year | To the world | To the US | US share |
|---|---|---|---|
| 2025 | US$205m | US$193m | 94% |
| 2024 | US$254m | US$222m | 87% |
| 2023 | US$222m | US$201m | 91% |
| 2022 | US$185m | US$172m | 93% |
| 2021 | US$184m | US$178m | 97% |
| 2020 | US$132m | US$127m | 96% |
Tariffs and rules to check
Check product by product. Demand data shows where buyers are, not whether your specific product can enter a market. Rules, standards and certification differ by product, by market and over time. Use the official sources below and confirm with the importing country's authority or a licensed customs broker before you ship.
Plain replacement parts carry no own CE marking; only interchangeable attachments and safety components need conformity assessment.
Under CETA, Canadian-origin parts of 8431 20 enter the EU at 0% instead of 4%, and enter the UK at 0% instead of 4%. UK rates apply under the Canada-UK Trade Continuity Agreement. Preferential rates apply only when the goods meet the agreement's rules of origin and the origin statement is in order.
In the main buyer markets
- Regulation (EU) 2023/1230 applies to machinery, partly completed machinery and listed related products (interchangeable equipment, safety components, lifting accessories, chains, ropes and webbing, removable mechanical transmission devices); plain replacement parts are not listed, but a part placed on the market on its own to fulfil a safety function is a safety component. Source
- Regulation (EU) 2023/1230 also covers interchangeable equipment, so forklift attachments that change a truck's function and are placed on the market separately need their own conformity assessment and CE marking. Source
- The Machinery Regulation (EU) 2023/1230 replaces Directive 2006/42/EC and applies from 20 January 2027 according to the Commission after a corrigendum; machinery placed on the EU market before that date must comply with Directive 2006/42/EC. Source
- UK (GB): the Supply of Machinery (Safety) Regulations 2008 cover machinery and partly completed machinery, and recognition of CE marking on the GB market was extended from 1 October 2024. Source
Canadian requirements, exporting and importingOpen in the HS Code Checker →
No product-specific Canadian requirements found for this direction beyond the general ones below.
Applies to all goods (4)
- CBSAExport declaration through CERS
Commercial goods shipped to destinations other than the United States generally need an export declaration to the CBSA, filed through the CBSA's Canadian Export Reporting System (CERS); non-restricted commercial goods valued under CAD 2,000 are exempt.
Official source - Global Affairs CanadaCheck the Export Control List
Items on Canada's Export Control List need an export permit; the list is defined by technical description, not HS code. The current Guide to the ECL (January 2026 version) has been in force since 1 May 2026.
Official source - Global Affairs CanadaRe-exporting goods of US origin
Export Control List item 5400 covers goods of US origin that are re-exported from Canada to countries other than the US without substantial further processing; check whether a permit or general permit applies.
Official source - Global Affairs CanadaCheck Canadian sanctions by country and party
Canada imposes sanctions under the Special Economic Measures Act and the United Nations Act on listed countries, entities and people (including Russia, Belarus, Iran and North Korea); screen the destination, buyer and supplier before any deal.
Official source
Checked against official sources on Nov 21, 2026. A starting checklist, not legal advice: requirements depend on the exact goods, origin and destination. Confirm with the agency or your customs broker before you ship.
Government notices on HS 8431.20
- ·Finance CanadaIn forceImports into CanadaNew 15% Canadian counter-tariff on certain U.S. machinery goods
Canada imposed a 15% surtax on the U.S.-origin goods listed in Schedule 1 of the United States Surtax Order (2026). Applies to goods of U.S. origin imported into Canada on or after September 8, 2026, in response to new U.S. Section 338 tariffs.
Effective Sep 8, 2026Official notice
Look up your exact case
- EU Access2Markets: HS 843120 from Canada to GermanyEuropean Commission tool: tariff under CETA, rules of origin, product requirements and taxes for any EU country. Pick the 8-digit line for your product.
- UK Trade Tariff: HS 843120UK government tariff: duty for Canadian origin under the UK-Canada agreement, import controls and documents.
- Canada Tariff FinderGovernment of Canada tool comparing tariffs Canadian exporters face under each free trade agreement, for markets beyond Europe.
- WTO ePing: new rules on "forklift parts"Notifications of new technical regulations and food safety measures from WTO members. Sign up for alerts on your product.
Where to find Canadian producers
Looking for a Canadian supplier of this product, or benchmarking competitors? These public directories let you search Canadian companies.
- Government of Canada: directories of Canadian companiesHub of federal and sector directories for finding Canadian manufacturers and suppliers.
- Canada's Business Registries searchLook up a named Canadian company's registration details across participating registries.
- Trade Commissioner ServiceFree help from Canada's trade commissioners abroad, including market intelligence and qualified contacts.
Edition history
How this product looked in each quarterly edition of the monitor.
| Edition | Canada exports (YTD) | US share | Non-US demand | Brief |
|---|---|---|---|---|
| Q3 2026 | C$184m (Jan to Sep 2026) | 96% | US$5.4bn (2024) | Read |
Need a second market for forklift and works truck parts?
Three ways we can help, depending on where you are in the decision.
Our verdict on up to two markets you choose: worth a closer look, or a clear reason to rule it out now, with the codes, duties and rules behind it.
Order a briefNames of companies importing 8431.20 goods in the market you choose, with their import activity and decision-maker contacts, as a report and CSV.
Find importersWe will shortlist the three most promising markets beyond the US, starting from the largest importers (Germany, France and Mexico), with the rules to meet and a landed-cost comparison.
Request a studyFree guides: how to score a market and the real landed cost of exporting.
More products in the Q3 2026 edition
Questions
How dependent are Canada's forklift and works truck parts exports on the United States?
In the Q3 2026 edition of the Canada Export Opportunity Monitor, 96% of Canada's exports of HS 843120 went to the United States (Jan to Sep 2026, Statistics Canada).
Which countries import the most forklift and works truck parts outside the US?
Outside the United States, the largest importers of HS 843120 in 2024 were Germany, France, Mexico. Total non-US imports were US$5.4bn (UN Comtrade).
What rules apply when exporting forklift and works truck parts from Canada?
Plain replacement parts carry no own CE marking; only interchangeable attachments and safety components need conformity assessment. Requirements differ by product and market, so check the official sources linked on this page and confirm with the importing country's authority or a licensed customs broker before shipping.
Sources: UN Comtrade (2020 to 2024; Canada annual 2020 to 2025), Statistics Canada (Canada January to September 2026). Mirror statistics reported by importers can differ from Canada's own export figures. Values are in current dollars, so growth includes price changes. This page is general information, not legal or customs advice. See the methodology.
Get each new edition of the Export Opportunity Monitor
Once a quarter we refresh the data, add products and send a short brief on what changed for Canadian exporters. Free, no account needed.
Your next market starts with insight.
Fresh opportunities, delivered every quarter.