Metal hinges
Hinges of base metal, for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like. Base metal hinges of all kinds, from building door and window hinges to furniture, cabinet and vehicle body hinges.
Of every $100 of this product Canada exports, about $92 goes to the United States.
- Advantage (RCA)
- 1.5x
- Rules to check
- Medium
The opportunity in brief
Canada exported C$252 million of metal hinges in January to September 2026, up about 17 percent on 2025, with 92 percent going to the US. Non-US sales rose about 21 percent, dominated by Mexico at C$15.9 million, well ahead of France at C$0.7 million and Germany at C$0.5 million.
Outside the US, buyers imported US$4.3 billion in 2024, growing about 2 percent a year, led by Germany, Mexico, Poland, China and the UK. Canada reaches 105 non-US markets and already holds about 8 percent of Mexico's market and about 5.5 percent of China's, but very little in Europe. Building hinges covered by EN 1935 need CE marking in the EU, while furniture hinges face only general rules. Our reading is that Mexico and China are the markets to deepen first.
Is this your product?
Everything on this page is measured at the 6-digit HS level, the most detailed level shared by every country. Check where your product sits in the HS tree before you use the figures below.
- Chapter 83Metal; miscellaneous products of base metal
- Heading 8302Base metal mountings, fittings and similar articles for furniture, doors, staircases, windows, trunks, chests etc, castors with mountings of base metal, automatic door closers of base metal
- Subheading 8302.10Hinges; suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like, of base metal
Not quite your product? Other codes under heading 83027 other subheadings
- 8302.20Castors; with mountings, of base metal
- 8302.30Mountings, fittings and similar articles; for motor vehicles, of base metal In this monitor →
- 8302.41Mountings, fittings and similar articles; of base metal, suitable for buildings
- 8302.42Mountings, fittings and similar articles; suitable for furniture of base metal
- 8302.49Mountings, fittings and similar articles; suitable for other than buildings or furniture, of base metal
- 8302.50Hat-racks, hat-pegs, brackets and similar fixtures, of base metal
- 8302.60Automatic door closures; of base metal
The national codes under HS 8302.10
Below 6 digits each country sets its own lines, so the same product has a different code in Canada, the EU and the UK. Figures on this page cover all of them together.
Not split further: use 8302.10.00.
Source: Statistics Canada, 2026.
- 8302.10.00.10For furniture
- 8302.10.00.20For motor vehicles
- 8302.10.00.30For interior or exterior doors, other than garage, overhead or sliding doors
- 8302.10.00.90Other
Source: Canada Border Services Agency, T2026-2, effective 2026-09-01.
Not split further: use 8302 10 00.
Source: Combined Nomenclature, CN 2026.
- 8302 10 00 10For use in civil aircraft
- 8302 10 00 20Armrest hinge made of magnesium with: a length of 239mm or more but not more than 270mm, a width of 150mm or more but not more than 175mm, a height of 110mm or more but not more than 135mm, mounting holes for a lock mechanism
- 8302 10 00 90Other
Source: UK Integrated Online Tariff (UK Trade Tariff), Live nomenclature as of 2026-11-21.
HS chapter, heading and subheading descriptions are the UN Comtrade short forms of the HS 2022 nomenclature, not the legal text. The customs authority of the importing country decides the final classification; if you are unsure, ask your customs broker or request a binding ruling (in the EU, Binding Tariff Information).
How hard is this product to export?
Five scores from 1 to 5, built from the data and verified rules on this page. They are a starting guide, not a verdict for your specific product. How the scores work
Regulatory Complexity
Entry requirements in the main EU and UK markets and Canadian export rules.
- CE or UKCA marking or declaration of conformity
Logistics Feasibility
Shelf life, cold chain, hazards, bulk, value per kg and distance to the main buyers.
- Canada's exports average about US$9.3 per kg
- Main buyers about 6,400 km away on average (transatlantic)
Market Accessibility
Tariff advantage, trade agreement coverage, competition, the price gap between Canada's US sales and the main markets, and Canada's existing footprint.
- Little or no tariff advantage in the EU and UK
- 73% of non-US demand is in markets with a Canadian free trade agreement
- Top markets buy from many suppliers (no dominant competitor)
- Canada's price on sales to the US is about 14% above what the three largest markets pay on average per kg (median), so freight would come on top of a higher price
- Canada already holds 1.3% of non-US demand
- 105 non-US markets already buy from Canada
Opportunity
Size, growth and Canadian penetration of demand outside the US.
- Sizeable non-US demand (US$4.3 billion)
- Slow growth (about 2% a year since 2020)
Diversification Urgency
How pressing it is for Canadian exporters of this product to find buyers beyond the US. It measures US exposure, not how fast a market must be entered.
- 92% of Canada's exports go to the US
- Exports up 17% year to date
- US tariff exposure: high. Steel, aluminum or zinc hinges face 25% Section 232 with no CUSMA exemption. Vehicle hinges face 25% unless CUSMA-qualifying. Other base-metal hinges get only Section 301.
Who you would compete with
73% of non-US demand for this product is in countries where a Canadian free trade agreement is in force. Canadian goods of this code sold to the US at about US$7.41/kg in 2024, before freight.
| Market | Main suppliers | Canada's share | Market avg import price | Canada's US price vs market | Canada's price there now |
|---|---|---|---|---|---|
| Germany | Austria 29%, Czechia 13%, China 11% | 0.22% | US$7.00/kg | 6% above | Too little volume |
| Mexico | US 22%, China 18%, Spain 18% | 8% | US$6.18/kg | 20% above | 45% below |
| Poland | Germany 22%, China 20%, Austria 19% | <0.1% | US$6.50/kg | 14% above | Too little volume |
How to read the price columns
Canada's US price vs market compares what Canadian goods of this code sell for in the US per kilogram (US customs value, before international freight) with the average price per kilogram the market pays its other suppliers (usually including freight to its border). Fifteen percent or more below the average leaves room to absorb ocean freight and is shown in blue; 30 percent or more above means sales would rely on quality or specification and is shown in pink; in between, freight will squeeze margins and the gap does not move the score. It is not the price a buyer would pay for an identical item: one HS code covers products of different grades, and exchange rates have moved since 2024.
Canada's price there now is shown only where Canada already holds at least 1% of the market and US$500,000 of sales. Smaller flows are often samples, spare parts or one-off orders and give misleading prices.
UN Comtrade 2024, imports reported by each market and by the US. How the price gap works
What it costs to reach these markets
What moves the cost of selling into each market compared with selling to the US: the exchange rate, the import duty and the cost of freight and insurance, for Canada and for the main competitors. For comparison, freight and insurance on Canadian goods of this kind shipped to the US come to about 2.6% of their value.
| Market | Canadian goods since 2024 | Landed cost vs market (October 2026) | Canada: duty | Canada: freight and insurance | Main competitors: duty, freight |
|---|---|---|---|---|---|
| Germany | EUR: 6% cheaper | About equal (+5%) exchange rate -6.4%, freight +6.2%, duty +0% vs competitors +0.6% | 0% (others pay 2.7%) | 5.9% (US: 2.6%) |
|
| Mexico | MXN: 2% cheaper | 27% above exchange rate -1.9%, freight +7.6%, before duty | 0% under CUSMA (if the goods meet its rules of origin; other suppliers' duties not covered yet) | 7.0% (US: 2.6%) |
|
| Poland | PLN: 5% cheaper | 15% above exchange rate -4.8%, freight +6.9%, duty +0% vs competitors +0.9% | 0% (others pay 2.7%) | 6.4% (US: 2.6%) |
|
How to read this table
Canadian goods since 2024 shows how the Canadian dollar has moved against the market's currency between the 2024 average and the October 2026 average: "6% cheaper" means a price fixed in Canadian dollars now costs buyers there about 6% less than in 2024.
Landed cost vs market answers one question: if you shipped the goods you sell to the US today, at the same price, to this market, would they cost buyers more or less at the border than what they pay other suppliers? It starts from Canada's price per kilogram on US sales, adds freight and insurance to this market and Canada's import duty, applies the exchange-rate change since 2024, and compares the result with the market's average import price from other suppliers plus the duty they pay (weighted by their shares; zero inside the EU). The line under each figure shows the parts. Within 10% either way reads as about equal. Below the average means you can match local prices and still cover freight; above means you would need to sell on quality, specification or service, or accept a lower price than in the US. One HS code covers products of different grades, so a higher figure can also mean Canada sells a higher-value version. Where duties are not covered yet, both sides are compared before duty. Anti-dumping and similar duties apply only to some companies, tariff lines or quantities, so they are kept out of the main figure. Where Canada or a main competitor faces one, a second line shows the worst case: each origin pays its highest ad valorem remedy rate on top of its duty.
Duties are the lowest rate each origin can claim on the national tariff lines under this HS code, shown as a range where lines differ. Canada's rate assumes the goods meet the agreement's rules of origin (CETA in the EU, the Canada-UK agreement in the UK) and are declared with a valid origin statement; otherwise the MFN rate applies. Tariff quotas and end-use relief are not included. Anti-dumping and similar duties often apply only to some products or companies: check the exact line. In Mexico, goods that meet the CUSMA rules of origin enter duty free; we do not yet cover the duties Mexico charges other suppliers, so the landed cost there is compared before duty. Duties for other markets outside the EU and UK are not covered yet.
Freight and insurance is the OECD's estimate of what it cost in 2024 to move goods of this kind (HS heading 8302) from each supplier to the market, as a share of their value at the border. Compare Canada's figure with the US figure to see the extra cost of an overseas market, and with competitors' figures to see who is closer. These are averages across all shipments of the heading, not quotes: your own cost depends on volume, packaging, lane and season. Trade inside the EU is recorded without freight, so it is shown as not measured.
Sources: Bank of Canada exchange rates (CZK, PLN and IDR from ECB reference rates; SAR from its US dollar peg); European Commission, Access2Markets (TARIC data); UK Integrated Online Tariff (trade-tariff.service.gov.uk); OECD International Transport and Insurance Costs of merchandise trade (ITIC), 2024. Duties checked 2026-11-21. How we measure costs
Why it matters now
Steel, aluminum or zinc hinges face 25% Section 232 with no CUSMA exemption. Vehicle hinges face 25% unless CUSMA-qualifying. Other base-metal hinges get only Section 301.
- Section 232 (steel and aluminum derivatives): 25% (some lines: 8302.10.60 (hinges of iron, steel, aluminum or zinc), where metal is at least 15% of weight). Source
- Section 232 (auto parts and heavy-truck parts): 25% (some lines: 8302.10.30 (hinges for motor vehicles)), CUSMA-compliant goods exempt. Source
- Section 301: 10% (8302.10.90 and other goods not covered by Section 232), CUSMA-compliant goods exempt. Source
US measures change often. Check current CBP guidance or a licensed customs broker before shipping.
- US duty on goods that qualify under CUSMA: 25% on some tariff lines of this code: if yours is not listed, the US is as before. Goods that do not qualify, or ship without a valid origin certification, pay 25% more.
- To keep your US buyer's cost unchanged you would have to cut your price by about 20%.
- Best alternative: Germany. Selling there at the price it pays other suppliers beats any US price cut larger than about 5%. The US stays the better market only if your buyer there pays at least 81% of the tariff. Replacing 25% of Canada's US sales would take about 9% of Germany's imports.
- Held back to "it depends": the US duty here is Section 232, which most other suppliers to the US pay too, so US prices for this product tend to rise and the cut you need is likely smaller.
A rule of thumb, not advice: it assumes you sell in the alternative market at the price it pays other suppliers and ignores the cost of finding buyers there. The share of the tariff your US buyer will pay is something only you can know from your negotiations. How the threshold works
How big is demand outside the US?
Imports of HS 830210 by every reporting country except the United States and Canada, in current US dollars.
Which countries import the most, and how much comes from Canada?
| Market | Imports | From Canada | Canada's share |
|---|---|---|---|
1Germany | US$519m | US$1m | 0.22% |
2Mexico | US$405m | US$34m | 8.4% |
3Poland | US$279m | US$62k | <0.1% |
4China | US$253m | US$14m | 5.5% |
5UK | US$183m | US$1m | 0.69% |
6France | US$165m | US$81k | <0.1% |
7Italy | US$150m | US$111k | <0.1% |
8Spain | US$128m | US$132k | 0.1% |
9India | US$124m | US$11k | <0.01% |
10Brazil | US$103m | US$87k | <0.1% |
What each market reports importing in 2024, in US dollars. "From Canada" includes Canadian goods shipped on through the US, so it can be higher than Canada's own export figures, such as the year-to-date sales at the top of the page, which count those goods as sales to the US.
Pink is the part supplied by Canada; the rest comes from other countries.
Canada's combined share of these 10 markets (US$51m of US$2.3bn imported).
The same markets, ranked by how promising they look for Canadian sellers: size and growth of demand, trade agreements, Canada's existing sales, price, distance and room for volume. 5 promising, 1 hard. Pink points count against a market, blue for it.
- 1Mexico5/5 · Strong candidate
- Takes 9.3% of non-US demand
- Imports growing about 19% a year since 2020
- Canadian free trade agreement in force (CPTPP, CUSMA)
- Canada already supplies 8.4% of this market
- Canada's US price is about 20% above what it pays others per kg
- Close to Canada: about 3,300 km
- 2Germany4/5 · Strong candidate
- Takes 12% of non-US demand
- Imports growing about 0.4% a year since 2020
- Canadian free trade agreement in force (CETA)
- Canada supplies 0.2% of this market
- Canada's US price is about 6% above what it pays others per kg
- 3UK3/5 · Worth a look
- Takes 4.2% of non-US demand
- Imports growing about 7% a year since 2020
- Canadian free trade agreement in force (Canada-UK TCA)
- Canada supplies 0.7% of this market
- Price not compared: this market reports no import weights
- Small next to Canada's US sales: a quarter of them would be 26% of its imports
- 4Italy3/5 · Worth a look
- Takes 3.5% of non-US demand
- Imports growing about 11% a year since 2020
- Canadian free trade agreement in force (CETA)
- Canada supplies under 0.2% of this market
- Canada's US price is about 12% below what it pays others per kg
- Small next to Canada's US sales: a quarter of them would be 31% of its imports
- 5Poland3/5 · Worth a look
- Takes 6.4% of non-US demand
- Imports growing about 3.2% a year since 2020
- Canadian free trade agreement in force (CETA)
- Canada supplies under 0.2% of this market
- Canada's US price is about 14% above what it pays others per kg
Canada's competitive position
Above 1 means Canada specialises in it.
Countries that reported imports from Canada.
Revealed comparative advantage (RCA) for Canada in HS 830210 is 1.5: this product makes up 1.5 times the share of Canada's exports that it makes up of world trade. Values above 1 indicate a specialisation. In 2024, 105 non-US markets reported imports of this product from Canada.
In Jan to Sep 2026, Canada exported C$252m of this product (+17.1% on the same period of the previous year), of which C$232m went to the United States. The largest non-US destinations were Mexico (C$16m), France (C$727k), Germany (C$546k), South Korea (C$546k).
Navy goes to the United States; blue goes to every other market.
| Year | To the world | To the US | US share |
|---|---|---|---|
| 2025 | US$205m | US$189m | 92% |
| 2024 | US$214m | US$197m | 92% |
| 2023 | US$206m | US$191m | 93% |
| 2022 | US$191m | US$177m | 93% |
| 2021 | US$182m | US$161m | 89% |
| 2020 | US$156m | US$139m | 89% |
Tariffs and rules to check
Check product by product. Demand data shows where buyers are, not whether your specific product can enter a market. Rules, standards and certification differ by product, by market and over time. Use the official sources below and confirm with the importing country's authority or a licensed customs broker before you ship.
Building hinges in scope of EN 1935 need CE marking, while furniture hinges face only general rules.
Under CETA, Canadian-origin hinges of 8302 10 enter the EU at 0% instead of 2.7%; the UK Global Tariff is already 0% for this subheading, so they enter the UK duty free. UK rates apply under the Canada-UK Trade Continuity Agreement. Preferential rates apply only when the goods meet the agreement's rules of origin and the origin statement is in order.
In the main buyer markets
- Heading 8302 is not listed in Annex I of the CBAM Regulation (EU) 2023/956, which covers iron and steel goods only up to chapter 73 and aluminium goods of chapter 76, so no CBAM reporting applies to these hinges. Source
- EN 1935:2002 (building hardware, single-axis hinges) is a cited harmonised standard under the Construction Products Regulation, so hinges within its scope need a declaration of performance and CE marking. Source
- The Construction Products Regulation (EU) 2024/3110 replaced Regulation (EU) No 305/2011 from 8 January 2026, while key 2011 provisions, including Articles 4 to 9 on the declaration of performance and CE marking, are only repealed from 8 January 2040. Source
- EU vehicle type approval under the General Safety Regulation (EU) 2019/2144 requires UN Regulation No 11 on door latches and door retention components for M1 and N1 vehicles, so carmakers will require door hinges that let the vehicle pass. Source
- UK (GB): CE marking remains available for construction products placed on the GB market; UKCA marking for products covered by a designated standard such as EN 1935 requires a UK approved body. Source
Canadian requirements, exporting and importingOpen in the HS Code Checker →
No product-specific Canadian requirements found for this direction beyond the general ones below.
Applies to all goods (4)
- CBSAExport declaration through CERS
Commercial goods shipped to destinations other than the United States generally need an export declaration to the CBSA, filed through the CBSA's Canadian Export Reporting System (CERS); non-restricted commercial goods valued under CAD 2,000 are exempt.
Official source - Global Affairs CanadaCheck the Export Control List
Items on Canada's Export Control List need an export permit; the list is defined by technical description, not HS code. The current Guide to the ECL (January 2026 version) has been in force since 1 May 2026.
Official source - Global Affairs CanadaRe-exporting goods of US origin
Export Control List item 5400 covers goods of US origin that are re-exported from Canada to countries other than the US without substantial further processing; check whether a permit or general permit applies.
Official source - Global Affairs CanadaCheck Canadian sanctions by country and party
Canada imposes sanctions under the Special Economic Measures Act and the United Nations Act on listed countries, entities and people (including Russia, Belarus, Iran and North Korea); screen the destination, buyer and supplier before any deal.
Official source
Checked against official sources on Nov 21, 2026. A starting checklist, not legal advice: requirements depend on the exact goods, origin and destination. Confirm with the agency or your customs broker before you ship.
Government notices on HS 8302.10
- ·Finance CanadaIn forceImports into CanadaNew 25% Canadian counter-tariff on certain U.S. goods
Canada imposed a 25% surtax on the U.S.-origin goods listed in Schedule 2 of the United States Surtax Order (2026). Applies to goods of U.S. origin imported into Canada on or after September 8, 2026, in response to new U.S. Section 338 tariffs.
Effective Sep 8, 2026Official notice - ·Finance CanadaEndedImports into CanadaMost Canadian counter-tariffs on U.S. goods removed September 1, 2025
The 25% surtaxes imposed in March 2025 on many U.S. consumer and industrial goods stopped applying on September 1, 2025. Counter-tariffs on U.S. steel, aluminum and autos stayed in place.
Look up your exact case
- EU Access2Markets: HS 830210 from Canada to GermanyEuropean Commission tool: tariff under CETA, rules of origin, product requirements and taxes for any EU country. Pick the 8-digit line for your product.
- UK Trade Tariff: HS 830210UK government tariff: duty for Canadian origin under the UK-Canada agreement, import controls and documents.
- Canada Tariff FinderGovernment of Canada tool comparing tariffs Canadian exporters face under each free trade agreement, for markets beyond Europe.
- WTO ePing: new rules on "hinge manufacturer"Notifications of new technical regulations and food safety measures from WTO members. Sign up for alerts on your product.
Where to find Canadian producers
Looking for a Canadian supplier of this product, or benchmarking competitors? These public directories let you search Canadian companies.
- Government of Canada: directories of Canadian companiesHub of federal and sector directories for finding Canadian manufacturers and suppliers.
- Canada's Business Registries searchLook up a named Canadian company's registration details across participating registries.
- Trade Commissioner ServiceFree help from Canada's trade commissioners abroad, including market intelligence and qualified contacts.
Edition history
How this product looked in each quarterly edition of the monitor.
| Edition | Canada exports (YTD) | US share | Non-US demand | Brief |
|---|---|---|---|---|
| Q3 2026 | C$252m (Jan to Sep 2026) | 92% | US$4.3bn (2024) | Read |
Need a second market for metal hinges?
Three ways we can help, depending on where you are in the decision.
Our verdict on up to two markets you choose: worth a closer look, or a clear reason to rule it out now, with the codes, duties and rules behind it.
Order a briefNames of companies importing 8302.10 goods in the market you choose, with their import activity and decision-maker contacts, as a report and CSV.
Find importersWe will shortlist the three most promising markets beyond the US, starting from the largest importers (Germany, Mexico and Poland), with the rules to meet and a landed-cost comparison.
Request a studyFree guides: how to score a market and the real landed cost of exporting.
More products in the Q3 2026 edition
Questions
How dependent are Canada's metal hinges exports on the United States?
In the Q3 2026 edition of the Canada Export Opportunity Monitor, 92% of Canada's exports of HS 830210 went to the United States (Jan to Sep 2026, Statistics Canada).
Which countries import the most metal hinges outside the US?
Outside the United States, the largest importers of HS 830210 in 2024 were Germany, Mexico, Poland. Total non-US imports were US$4.3bn (UN Comtrade).
What rules apply when exporting metal hinges from Canada?
Building hinges in scope of EN 1935 need CE marking, while furniture hinges face only general rules. Requirements differ by product and market, so check the official sources linked on this page and confirm with the importing country's authority or a licensed customs broker before shipping.
Sources: UN Comtrade (2020 to 2024; Canada annual 2020 to 2025), Statistics Canada (Canada January to September 2026). Mirror statistics reported by importers can differ from Canada's own export figures. Values are in current dollars, so growth includes price changes. This page is general information, not legal or customs advice. See the methodology.
Get each new edition of the Export Opportunity Monitor
Once a quarter we refresh the data, add products and send a short brief on what changed for Canadian exporters. Free, no account needed.
Your next market starts with insight.
Fresh opportunities, delivered every quarter.