Plastics machinery parts
Parts of machinery for working rubber or plastics or for making products from these materials (heading 8477). Parts for injection moulding, extrusion, blow moulding and thermoforming machines, such as screws, barrels, dies, platens and hot runner components.
Of every $100 of this product Canada exports, about $66 goes to the United States.
- Advantage (RCA)
- 2.5x
- Rules to check
- Low
The opportunity in brief
Canada exported C$387 million of plastics machinery parts in January to September 2026, down about 19 percent on 2025. Only 66 percent went to the US, a much more diversified mix than for most products. Non-US sales fell about 17 percent, led by China at C$23.5 million, Mexico at C$19.8 million and Brazil at C$12.1 million.
Outside the US, buyers imported US$5.9 billion in 2024, growing about 3.5 percent a year, led by Germany, China, Austria, India and Mexico. Canada supplies about 1.3 percent of non-US demand and sells to 97 markets, with about 5 percent of Mexico's market and about 1 percent of India's. Regulation is light: plain replacement parts are not machinery in their own right, although a part sold on its own to perform a safety function counts as a safety component under the EU machinery rules.
Is this your product?
Everything on this page is measured at the 6-digit HS level, the most detailed level shared by every country. Check where your product sits in the HS tree before you use the figures below.
- Chapter 84Machinery and mechanical appliances, boilers, nuclear reactors; parts thereof
- Heading 8477Machinery; for working rubber or plastics or for the manufacture of products from these materials, n.e.c. in this chapter
- Subheading 8477.90Machinery; parts of the machines of heading no. 8477, n.e.c. in item no. 8477.90
Not quite your product? Other codes under heading 84777 other subheadings
- 8477.10Machinery; injection-moulding machines, for working rubber or plastics or for the manufacture of products from these materials
- 8477.20Machinery; extruders, for working rubber or plastics or for the manufacture of products from these materials
- 8477.30Machinery; blow moulding machines, for working rubber or plastics or for the manufacture of products from these materials
- 8477.40Machinery; vacuum moulding machines and other thermoforming machines, for working rubber or plastics or for the manufacture of products from these materials
- 8477.51Machinery; for moulding or retreading pneumatic tyres or for moulding or otherwise forming inner tubes
- 8477.59Machinery; for moulding or forming, for working rubber or plastics or for the manufacture of products from these materials, n.e.c. in this chapter
- 8477.80Machinery; for working rubber or plastics or for the manufacture of products from these materials, n.e.c. in this chapter
The national codes under HS 8477.90
Below 6 digits each country sets its own lines, so the same product has a different code in Canada, the EU and the UK. Figures on this page cover all of them together.
Not split further: use 8477.90.00.
Source: Statistics Canada, 2026.
Show 11 codes
- 8477.90.10Base, bed, platen, clamp cylinder, ram and injection castings, weldments and fabrications
- 8477.90.20Barrel screws
- 8477.90.20.20For extruders
- 8477.90.20.90Other
- 8477.90.30Hydraulic assemblies consisting of at least two of the following: manifold, valves, pump or oil cooler
- 8477.90.90Other
- 8477.90.90.10For injection moulding machines
- 8477.90.90.20For extruders
- 8477.90.90.30For blow moulding machines
- 8477.90.90.40For machines for forming pneumatic tires
- 8477.90.90.90Other
Source: Canada Border Services Agency, T2026-2, effective 2026-09-01.
- 8477 90 10Of cast iron or cast steel
- 8477 90 80Other
Source: Combined Nomenclature, CN 2026.
- 8477 90 10 00Of cast iron or cast steel
- 8477 90 80 00Other
Source: UK Integrated Online Tariff (UK Trade Tariff), Live nomenclature as of 2026-11-21.
HS chapter, heading and subheading descriptions are the UN Comtrade short forms of the HS 2022 nomenclature, not the legal text. The customs authority of the importing country decides the final classification; if you are unsure, ask your customs broker or request a binding ruling (in the EU, Binding Tariff Information).
How hard is this product to export?
Five scores from 1 to 5, built from the data and verified rules on this page. They are a starting guide, not a verdict for your specific product. How the scores work
Regulatory Complexity
Entry requirements in the main EU and UK markets and Canadian export rules.
- No product-specific entry requirements identified
Logistics Feasibility
Shelf life, cold chain, hazards, bulk, value per kg and distance to the main buyers.
- High value per kg: Canada's exports average about US$15 per kg, which absorbs freight costs
- Main buyers about 8,000 km away on average (transatlantic)
Market Accessibility
Tariff advantage, trade agreement coverage, competition, the price gap between Canada's US sales and the main markets, and Canada's existing footprint.
- Little or no tariff advantage in the EU and UK
- 68% of non-US demand is in markets with a Canadian free trade agreement
- Price gap not scored: weight data for this code is incomplete
- Canada already holds 1.3% of non-US demand
- 97 non-US markets already buy from Canada
Opportunity
Size, growth and Canadian penetration of demand outside the US.
- Sizeable non-US demand (US$5.9 billion)
- Growth of about 3% a year since 2020
Diversification Urgency
How pressing it is for Canadian exporters of this product to find buyers beyond the US. It measures US exposure, not how fast a market must be entered.
- Only 66% of Canada's exports go to the US
- Exports down 19% year to date
- US tariff exposure: medium. Bases, platens and injection-molding machine parts pay Section 232 to a 15% total, no CUSMA exemption. Other lines face only CUSMA-exempt 10% Section 301.
Who you would compete with
68% of non-US demand for this product is in countries where a Canadian free trade agreement is in force.
| Market | Main suppliers | Canada's share | Market avg import price | Canada's US price vs market | Canada's price there now |
|---|---|---|---|---|---|
| Germany | Czechia 18%, Austria 14%, China 12% | 0.32% | US$16.71/kg | n/a | Too little volume |
| China | Germany 43%, Japan 12%, US 9% | 0.8% | US$47.71/kg | n/a | Too little volume |
| Austria | Germany 28%, Czechia 27%, Switzerland 8% | 0.23% | US$9.99/kg | n/a | Too little volume |
How to read the price columns
Canada's US price vs market compares what Canadian goods of this code sell for in the US per kilogram (US customs value, before international freight) with the average price per kilogram the market pays its other suppliers (usually including freight to its border). Fifteen percent or more below the average leaves room to absorb ocean freight and is shown in blue; 30 percent or more above means sales would rely on quality or specification and is shown in pink; in between, freight will squeeze margins and the gap does not move the score. It is not the price a buyer would pay for an identical item: one HS code covers products of different grades, and exchange rates have moved since 2024.
Canada's price there now is shown only where Canada already holds at least 1% of the market and US$500,000 of sales. Smaller flows are often samples, spare parts or one-off orders and give misleading prices.
UN Comtrade 2024, imports reported by each market and by the US. How the price gap works
What it costs to reach these markets
What moves the cost of selling into each market compared with selling to the US: the exchange rate, the import duty and the cost of freight and insurance, for Canada and for the main competitors. For comparison, freight and insurance on Canadian goods of this kind shipped to the US come to about 0.2% of their value.
| Market | Canadian goods since 2024 | Landed cost vs market (October 2026) | Canada: duty | Canada: freight and insurance | Main competitors: duty, freight |
|---|---|---|---|---|---|
| Germany | EUR: 6% cheaper | n/a | 0% (others pay 1.7%) | 3.9% (US: 0.2%) |
|
| China | CNY: 10% cheaper | n/a | Not covered yet | 5.1% (US: 0.2%) |
|
| Austria | EUR: 6% cheaper | n/a | 0% (others pay 1.7%) | 5.1% (US: 0.2%) |
|
How to read this table
Canadian goods since 2024 shows how the Canadian dollar has moved against the market's currency between the 2024 average and the October 2026 average: "6% cheaper" means a price fixed in Canadian dollars now costs buyers there about 6% less than in 2024.
Landed cost vs market answers one question: if you shipped the goods you sell to the US today, at the same price, to this market, would they cost buyers more or less at the border than what they pay other suppliers? It starts from Canada's price per kilogram on US sales, adds freight and insurance to this market and Canada's import duty, applies the exchange-rate change since 2024, and compares the result with the market's average import price from other suppliers plus the duty they pay (weighted by their shares; zero inside the EU). The line under each figure shows the parts. Within 10% either way reads as about equal. Below the average means you can match local prices and still cover freight; above means you would need to sell on quality, specification or service, or accept a lower price than in the US. One HS code covers products of different grades, so a higher figure can also mean Canada sells a higher-value version. Where duties are not covered yet, both sides are compared before duty. Anti-dumping and similar duties apply only to some companies, tariff lines or quantities, so they are kept out of the main figure. Where Canada or a main competitor faces one, a second line shows the worst case: each origin pays its highest ad valorem remedy rate on top of its duty.
Duties are the lowest rate each origin can claim on the national tariff lines under this HS code, shown as a range where lines differ. Canada's rate assumes the goods meet the agreement's rules of origin (CETA in the EU, the Canada-UK agreement in the UK) and are declared with a valid origin statement; otherwise the MFN rate applies. Tariff quotas and end-use relief are not included. Anti-dumping and similar duties often apply only to some products or companies: check the exact line. In Mexico, goods that meet the CUSMA rules of origin enter duty free; we do not yet cover the duties Mexico charges other suppliers, so the landed cost there is compared before duty. Duties for other markets outside the EU and UK are not covered yet.
Freight and insurance is the OECD's estimate of what it cost in 2024 to move goods of this kind (HS heading 8477) from each supplier to the market, as a share of their value at the border. Compare Canada's figure with the US figure to see the extra cost of an overseas market, and with competitors' figures to see who is closer. These are averages across all shipments of the heading, not quotes: your own cost depends on volume, packaging, lane and season. Trade inside the EU is recorded without freight, so it is shown as not measured.
Sources: Bank of Canada exchange rates (CZK, PLN and IDR from ECB reference rates; SAR from its US dollar peg); European Commission, Access2Markets (TARIC data); UK Integrated Online Tariff (trade-tariff.service.gov.uk); OECD International Transport and Insurance Costs of merchandise trade (ITIC), 2024. Duties checked 2026-11-21. How we measure costs
Why it matters now
Bases, platens and injection-molding machine parts pay Section 232 to a 15% total, no CUSMA exemption. Other lines face only CUSMA-exempt 10% Section 301.
- Section 232 (steel derivatives, Annex III): 15% total (column 1 rate plus 232 equals 15%) (some lines: 8477.90.25, 8477.90.86.01 (injection-molding machine parts); metal 15%+ of weight). Source
- Section 301: 10% (other lines), CUSMA-compliant goods exempt. Source
US measures change often. Check current CBP guidance or a licensed customs broker before shipping.
- US duty on goods that qualify under CUSMA: up to 15% on some tariff lines of this code: if yours is not listed, the US is as before. Goods that do not qualify, or ship without a valid origin certification, pay 10% more.
- To keep your US buyer's cost unchanged you would have to cut your price by about 13%.
- No comparable landed cost for the largest non-US markets, so no alternative is measured.
A rule of thumb, not advice: it assumes you sell in the alternative market at the price it pays other suppliers and ignores the cost of finding buyers there. The share of the tariff your US buyer will pay is something only you can know from your negotiations. How the threshold works
How big is demand outside the US?
Imports of HS 847790 by every reporting country except the United States and Canada, in current US dollars.
Which countries import the most, and how much comes from Canada?
| Market | Imports | From Canada | Canada's share |
|---|---|---|---|
1Germany | US$626m | US$2m | 0.32% |
2China | US$443m | US$4m | 0.8% |
3Austria | US$318m | US$729k | 0.23% |
4India | US$289m | US$3m | 1.0% |
5Mexico | US$281m | US$15m | 5.4% |
6Japan | US$275m | US$1m | 0.44% |
7Italy | US$270m | US$1m | 0.43% |
8France | US$231m | US$772k | 0.33% |
9Poland | US$152m | US$340k | 0.22% |
10Spain | US$152m | US$532k | 0.35% |
What each market reports importing in 2024, in US dollars. "From Canada" includes Canadian goods shipped on through the US, so it can be higher than Canada's own export figures, such as the year-to-date sales at the top of the page, which count those goods as sales to the US.
Pink is the part supplied by Canada; the rest comes from other countries.
Canada's combined share of these 10 markets (US$28m of US$3.0bn imported).
The same markets, ranked by how promising they look for Canadian sellers: size and growth of demand, trade agreements, Canada's existing sales, price, distance and room for volume. 5 promising, 1 hard. Pink points count against a market, blue for it.
- 1Mexico4/5 · Strong candidate
- Takes 4.8% of non-US demand
- Imports growing about 13% a year since 2020
- Canadian free trade agreement in force (CPTPP, CUSMA)
- Canada already supplies 5.4% of this market
- Price not compared: Canada's US price per kg is not verified for this code
- Close to Canada: about 3,300 km
- Small next to Canada's US sales: a quarter of them would be 25% of its imports
- 2Germany4/5 · Strong candidate
- Takes 11% of non-US demand
- Imports growing about 2.9% a year since 2020
- Canadian free trade agreement in force (CETA)
- Canada supplies 0.3% of this market
- Price not compared: Canada's US price per kg is not verified for this code
- 3Italy3/5 · Worth a look
- Takes 4.6% of non-US demand
- Imports growing about 6.5% a year since 2020
- Canadian free trade agreement in force (CETA)
- Canada supplies 0.4% of this market
- Price not compared: Canada's US price per kg is not verified for this code
- Small next to Canada's US sales: a quarter of them would be 26% of its imports
- 4Poland3/5 · Worth a look
- Takes 2.6% of non-US demand
- Imports growing about 9.4% a year since 2020
- Canadian free trade agreement in force (CETA)
- Canada supplies 0.2% of this market
- Price not compared: Canada's US price per kg is not verified for this code
- Small next to Canada's US sales: a quarter of them would be 47% of its imports
- 5China3/5 · Worth a look
- Takes 7.5% of non-US demand
- Imports growing about 7.8% a year since 2020
- No Canadian free trade agreement
- Canada supplies 0.8% of this market
- Price not compared: Canada's US price per kg is not verified for this code
- Far from Canada: about 11,400 km
Canada's competitive position
Above 1 means Canada specialises in it.
Countries that reported imports from Canada.
Revealed comparative advantage (RCA) for Canada in HS 847790 is 2.5: this product makes up 2.5 times the share of Canada's exports that it makes up of world trade. Values above 1 indicate a specialisation. In 2024, 97 non-US markets reported imports of this product from Canada.
In Jan to Sep 2026, Canada exported C$387m of this product (-19.4% on the same period of the previous year), of which C$255m went to the United States. The largest non-US destinations were China (C$23m), Mexico (C$20m), Brazil (C$12m), Luxembourg (C$11m).
Navy goes to the United States; blue goes to every other market.
| Year | To the world | To the US | US share |
|---|---|---|---|
| 2025 | US$437m | US$286m | 65% |
| 2024 | US$486m | US$314m | 65% |
| 2023 | US$444m | US$310m | 70% |
| 2022 | US$443m | US$301m | 68% |
| 2021 | US$452m | US$330m | 73% |
| 2020 | US$442m | US$325m | 74% |
Tariffs and rules to check
Check product by product. Demand data shows where buyers are, not whether your specific product can enter a market. Rules, standards and certification differ by product, by market and over time. Use the official sources below and confirm with the importing country's authority or a licensed customs broker before you ship.
Wear and replacement parts are not machinery in their own right, so obligations sit mainly with the machine builder.
Under CETA, Canadian-origin parts of 8477 90 enter the EU at 0% instead of 1.7%, and enter the UK at 0% (UK Global Tariff also 0%). UK rates apply under the Canada-UK Trade Continuity Agreement. Preferential rates apply only when the goods meet the agreement's rules of origin and the origin statement is in order.
In the main buyer markets
- Regulation (EU) 2023/1230 applies to machinery, partly completed machinery and listed related products (interchangeable equipment, safety components, lifting accessories, chains, ropes and webbing, removable mechanical transmission devices); plain replacement parts are not listed, but a part placed on the market on its own to fulfil a safety function is a safety component. Source
- The Machinery Regulation (EU) 2023/1230 replaces Directive 2006/42/EC and applies from 20 January 2027 according to the Commission after a corrigendum; machinery placed on the EU market before that date must comply with Directive 2006/42/EC. Source
- Chapter 84 parts are not in Annex I of the CBAM Regulation (EU) 2023/956, even when made of steel or cast iron. Source
- UK (GB): the Supply of Machinery (Safety) Regulations 2008 cover machinery and partly completed machinery, and recognition of CE marking on the GB market was extended from 1 October 2024. Source
Canadian requirements, exporting and importingOpen in the HS Code Checker →
- May applyGlobal Affairs CanadaECL item 1-1.B.1: composite-production machine parts
Export Control List item 1-1.B.1 controls specially designed components of machines that produce composite structures or fibres, such as filament-winding or tape-laying machines; parts for ordinary moulding or extrusion machines are not caught.
Official source
Applies to all goods (4)
- CBSAExport declaration through CERS
Commercial goods shipped to destinations other than the United States generally need an export declaration to the CBSA, filed through the CBSA's Canadian Export Reporting System (CERS); non-restricted commercial goods valued under CAD 2,000 are exempt.
Official source - Global Affairs CanadaCheck the Export Control List
Items on Canada's Export Control List need an export permit; the list is defined by technical description, not HS code. The current Guide to the ECL (January 2026 version) has been in force since 1 May 2026.
Official source - Global Affairs CanadaRe-exporting goods of US origin
Export Control List item 5400 covers goods of US origin that are re-exported from Canada to countries other than the US without substantial further processing; check whether a permit or general permit applies.
Official source - Global Affairs CanadaCheck Canadian sanctions by country and party
Canada imposes sanctions under the Special Economic Measures Act and the United Nations Act on listed countries, entities and people (including Russia, Belarus, Iran and North Korea); screen the destination, buyer and supplier before any deal.
Official source
Checked against official sources on Nov 21, 2026. A starting checklist, not legal advice: requirements depend on the exact goods, origin and destination. Confirm with the agency or your customs broker before you ship.
Look up your exact case
- EU Access2Markets: HS 847790 from Canada to GermanyEuropean Commission tool: tariff under CETA, rules of origin, product requirements and taxes for any EU country. Pick the 8-digit line for your product.
- UK Trade Tariff: HS 847790UK government tariff: duty for Canadian origin under the UK-Canada agreement, import controls and documents.
- Canada Tariff FinderGovernment of Canada tool comparing tariffs Canadian exporters face under each free trade agreement, for markets beyond Europe.
- WTO ePing: new rules on "extrusion screws and barrels"Notifications of new technical regulations and food safety measures from WTO members. Sign up for alerts on your product.
Where to find Canadian producers
Looking for a Canadian supplier of this product, or benchmarking competitors? These public directories let you search Canadian companies.
- Government of Canada: directories of Canadian companiesHub of federal and sector directories for finding Canadian manufacturers and suppliers.
- Canada's Business Registries searchLook up a named Canadian company's registration details across participating registries.
- Trade Commissioner ServiceFree help from Canada's trade commissioners abroad, including market intelligence and qualified contacts.
Edition history
How this product looked in each quarterly edition of the monitor.
| Edition | Canada exports (YTD) | US share | Non-US demand | Brief |
|---|---|---|---|---|
| Q3 2026 | C$387m (Jan to Sep 2026) | 66% | US$5.9bn (2024) | Read |
Turn this data into a market plan for plastics machinery parts
Three ways we can help, depending on where you are in the decision.
Our verdict on up to two markets you choose: worth a closer look, or a clear reason to rule it out now, with the codes, duties and rules behind it.
Order a briefNames of companies importing 8477.90 goods in the market you choose, with their import activity and decision-maker contacts, as a report and CSV.
Find importersWe will shortlist the best non-US markets for your product, starting from the largest importers (Germany, China and Austria), with buyer requirements, the rules to meet and a landed-cost comparison.
Request a studyFree guides: how to score a market and the real landed cost of exporting.
More products in the Q3 2026 edition
Questions
How dependent are Canada's plastics machinery parts exports on the United States?
In the Q3 2026 edition of the Canada Export Opportunity Monitor, 66% of Canada's exports of HS 847790 went to the United States (Jan to Sep 2026, Statistics Canada).
Which countries import the most plastics machinery parts outside the US?
Outside the United States, the largest importers of HS 847790 in 2024 were Germany, China, Austria. Total non-US imports were US$5.9bn (UN Comtrade).
What rules apply when exporting plastics machinery parts from Canada?
Wear and replacement parts are not machinery in their own right, so obligations sit mainly with the machine builder. Requirements differ by product and market, so check the official sources linked on this page and confirm with the importing country's authority or a licensed customs broker before shipping.
Sources: UN Comtrade (2020 to 2024; Canada annual 2020 to 2025), Statistics Canada (Canada January to September 2026). Mirror statistics reported by importers can differ from Canada's own export figures. Values are in current dollars, so growth includes price changes. This page is general information, not legal or customs advice. See the methodology.
Get each new edition of the Export Opportunity Monitor
Once a quarter we refresh the data, add products and send a short brief on what changed for Canadian exporters. Free, no account needed.
Your next market starts with insight.
Fresh opportunities, delivered every quarter.