WTO ⌁ World Trade Report 2025UN Comtrade ⌁ records since 2005JTH ⌁ Trade ResilienceTariff Profiles ⌁ ~200 economiesHSCode ⌁ 5,600+ commoditiesAI Engine ⌁ Real-time market scoringWTO ⌁ World Trade Report 2025UN Comtrade ⌁ records since 2005JTH ⌁ Trade ResilienceTariff Profiles ⌁ ~200 economiesHSCode ⌁ 5,600+ commoditiesAI Engine ⌁ Real-time market scoring
Metals, machinery and equipment · Q3 2026 edition

Welded steel pipes

HS 730630

Other tubes and pipes, welded, of circular cross-section, of iron or non-alloy steel (external diameter up to 406.4 mm). Welded carbon steel tubes and pipes of round section, such as precision tubes, threaded gas pipe and standard pipe for construction and mechanical uses.

At a glance
88%
to the US

Of every $100 of this product Canada exports, about $88 goes to the United States.

Advantage (RCA)
1.4x
Rules to check
High
Exports going to the US (Jan to Sep 2026)
88%
Selected on 2024 data, when 93% went to the US
Non-US demand (2024)
US$5.5bn
What the rest of the world imports
Non-US demand growth / yr since 2020
+5.5%
How fast that demand is growing
Canada's share of non-US market
0.59%
Room left for Canadian sellers

The opportunity in brief

Canada exported C$163 million of welded steel pipes in January to September 2026, down about 19 percent on 2025, with 88 percent going to the US. Non-US sales rose about 5 percent, led clearly by Mexico at C$13.3 million, with South Africa and Chile at about C$1 million each.

Outside the US, buyers imported US$5.5 billion in 2024, growing about 5.5 percent a year, led by Germany, Mexico, France, Poland and the Netherlands. Canada holds about 6 percent of Mexico's market and about 0.6 percent of the Netherlands'. Europe is hard: since 1 July 2026 the EU and UK limit these pipes by quota, with a 50 percent duty once quotas fill and no Canada-specific quota, and EU carbon border reporting applies. Our reading is that Mexico is the realistic focus.

HS 7306.30 · HS 2022

Is this your product?

Everything on this page is measured at the 6-digit HS level, the most detailed level shared by every country. Check where your product sits in the HS tree before you use the figures below.

  1. Chapter 73
    Iron or steel articles
  2. Heading 7306
    Iron or steel (excluding cast iron); tubes, pipes and hollow profiles (not seamless), n.e.c. in chapter 73
  3. Subheading 7306.30
    Iron or non-alloy steel (excluding cast iron); tubes and pipes (not seamless), welded, of circular cross-section, n.e.c. in chapter 73
Not quite your product? Other codes under heading 73069 other subheadings
  • 7306.11Steel; stainless; line pipe of a kind used for oil or gas pipelines n.e.c. in chapter 73, welded, (not seamless)
  • 7306.19Iron or steel (excluding cast iron); line pipe of a kind used for oil or gas pipelines (other than of stainless steel or seamless), n.e.c. in chapter 73
  • 7306.21Steel, stainless; casing and tubing of a kind used in drilling for oil and gas, n.e.c. in chapter 73, welded, (not seamless)
  • 7306.29Iron or steel (excluding cast iron); casing and tubing of a kind used in drilling for oil and gas (other than stainless steel or seamless), n.e.c. in chapter 73
  • 7306.40Steel, stainless; tubes, pipes and hollow profiles, welded, of circular cross-section, n.e.c. in chapter 73
  • 7306.50Steel, alloy; tubes, pipes and hollow profiles (other than stainless steel or seamless), welded, of circular cross-section, n.e.c. in chapter 73
  • 7306.61Iron or steel (excluding cast iron); tubes, pipes and hollow profiles (not seamless), welded, of square or rectangular cross-section, n.e.c. in chapter 73
  • 7306.69Iron or steel (excluding cast iron); tubes, pipes and hollow profiles (not seamless), n.e.c. in chapter 73, welded, of non-circular cross-section (not square or rectangular cross-section)
  • 7306.90Iron or steel (excluding cast iron); tubes, pipes and hollow profiles (not seamless), n.e.c. in chapter 73

The national codes under HS 7306.30

Below 6 digits each country sets its own lines, so the same product has a different code in Canada, the EU and the UK. Figures on this page cover all of them together.

Canada: export classification
The code to declare when exporting from Canada (CERS)

Not split further: use 7306.30.00.

Source: Statistics Canada, 2026.

Canada: import tariff
The tariff item used when importing into Canada (CBSA)
Show 40 codes
  • Of an external diameter not exceeding 60.325 mm:
  • 7306.30.00.41Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification
  • 7306.30.00.42Piling pipe, of ASTM A252 or equivalent specification
  • 7306.30.00.43Electrical metallic tubing, of UL 797 or equivalent specification
  • 7306.30.00.44Galvanized, of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.45Galvanized, other
  • 7306.30.00.46Bare or lacquered , of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.47Other, of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.49Other
  • Of an external diameter of greater than 60.325 mm but not exceeding 168.28 mm:
  • 7306.30.00.51Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification
  • 7306.30.00.52Piling pipe, of ASTM A252 or equivalent specification
  • 7306.30.00.53Electrical metallic tubing, of UL 797 or equivalent specification
  • 7306.30.00.54Galvanized, of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.55Galvanized, other
  • 7306.30.00.56Bare or lacquered , of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.57Other, of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.59Other
  • Of an external diameter of greater than 168.28 mm but not exceeding 273.05 mm:
  • 7306.30.00.61Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification
  • 7306.30.00.62Piling pipe, of ASTM A252 or equivalent specification
  • 7306.30.00.63Electrical metallic tubing, of UL 797 or equivalent specification
  • 7306.30.00.64Galvanized, of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.65Galvanized, other
  • 7306.30.00.66Bare or lacquered , of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.67Other, of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.69Other
  • Of an external diameter of greater than 273.05 mm but not exceeding 406.4 mm:
  • 7306.30.00.71Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification
  • 7306.30.00.72Piling pipe, of ASTM A252 or equivalent specification
  • 7306.30.00.73Electrical metallic tubing, of UL 797 or equivalent specification
  • 7306.30.00.74Galvanized, of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.75Galvanized, other
  • 7306.30.00.76Bare or lacquered , of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.77Other, of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.79Other
  • Of an external diameter greater than 406.4 mm:
  • 7306.30.00.81Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification
  • 7306.30.00.82Piling pipe, of ASTM A252 or equivalent specification
  • 7306.30.00.83Electrical metallic tubing, of UL 797 or equivalent specification
  • 7306.30.00.84Galvanized, of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.85Galvanized, other
  • 7306.30.00.86Bare or lacquered , of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.87Other, of ASTM A53 A and B, ASTM A135, ASTM A795, ASTM A589, AWWA C200-97 or equivalent specification
  • 7306.30.00.89Other

Source: Canada Border Services Agency, T2026-2, effective 2026-09-01.

European Union: Combined Nomenclature
The code your EU buyer declares on import; EU duty is set per line
Show 7 codes
  • Precision tubes:
  • 7306 30 12Cold-drawn or cold-rolled (cold-reduced)
  • 7306 30 18Other
  • Other:
  • Threaded or threadable tubes (gas pipe):
  • 7306 30 41Plated or coated with zinc
  • 7306 30 49Other
  • Other, of an external diameter:
  • Not exceeding 168,3 mm:
  • 7306 30 72Plated or coated with zinc
  • 7306 30 77Other
  • 7306 30 80Exceeding 168,3 mm but not exceeding 406,4 mm

Source: Combined Nomenclature, CN 2026.

United Kingdom: commodity code
The code your UK buyer declares on import (UK Global Tariff)
Show 15 codes
  • Precision tubes:
  • 7306 30 12 00Cold-drawn or cold-rolled (cold-reduced)
  • 7306 30 18 00Other
  • Other:
  • Threaded or threadable tubes (gas pipe):
  • 7306 30 41 00Plated or coated with zinc
  • 7306 30 41 20Tubes and pipes of an external diameter not exceeding 168,3 mm
  • 7306 30 41 90Other
  • 7306 30 49 00Other
  • 7306 30 49 20Tubes and pipes of an external diameter not exceeding 168,3 mm
  • 7306 30 49 90Other
  • Other, of an external diameter:
  • Not exceeding 168,3 mm:
  • 7306 30 72 00Plated or coated with zinc
  • 7306 30 72 80Tubes and pipes
  • 7306 30 72 90Other
  • 7306 30 77 00Other
  • 7306 30 77 80Tubes and pipes
  • 7306 30 77 90Other
  • 7306 30 80 00Exceeding 168,3 mm but not exceeding 406,4 mm

Source: UK Integrated Online Tariff (UK Trade Tariff), Live nomenclature as of 2026-11-21.

HS chapter, heading and subheading descriptions are the UN Comtrade short forms of the HS 2022 nomenclature, not the legal text. The customs authority of the importing country decides the final classification; if you are unsure, ask your customs broker or request a binding ruling (in the EU, Binding Tariff Information).

JTH Index v2.3 · at a glance

How hard is this product to export?

Five scores from 1 to 5, built from the data and verified rules on this page. They are a starting guide, not a verdict for your specific product. How the scores work

Regulatory Complexity

3/5

Entry requirements in the main EU and UK markets and Canadian export rules.

1 simple, 5 complex
  • Carbon border (CBAM) or deforestation (EUDR) due diligence

Logistics Feasibility

3/5

Shelf life, cold chain, hazards, bulk, value per kg and distance to the main buyers.

1 hard, 5 easy
  • Low value per kg: Canada's exports average about US$1.5 per kg, so freight weighs heavily
  • Main buyers about 5,600 km away on average (transatlantic)

Market Accessibility

2/5

Tariff advantage, trade agreement coverage, competition, the price gap between Canada's US sales and the main markets, and Canada's existing footprint.

1 hard, 5 open
  • Little or no tariff advantage in the EU and UK
  • 74% of non-US demand is in markets with a Canadian free trade agreement
  • Canada's price on sales to the US is about 7% above what the three largest markets pay on average per kg (median), so freight would come on top of a higher price
  • Canada holds 0.59% of non-US demand
  • Quotas, safeguard or trade-remedy duties apply

Opportunity

2/5

Size, growth and Canadian penetration of demand outside the US.

1 small, 5 large
  • Sizeable non-US demand (US$5.5 billion)
  • Growth of about 5% a year since 2020

Diversification Urgency

5/5

How pressing it is for Canadian exporters of this product to find buyers beyond the US. It measures US exposure, not how fast a market must be entered.

1 low, 5 high
  • 88% of Canada's exports go to the US
  • Exports down 19% year to date
  • US tariff exposure: high. Welded steel pipe (7306.30) is a Section 232 steel article: 50% on full value, no CUSMA exemption. Not on the Section 338 list.

Who you would compete with

74% of non-US demand for this product is in countries where a Canadian free trade agreement is in force. Canadian goods of this code sold to the US at about US$1.44/kg in 2024, before freight.

Main suppliers, Canada's share and the price gap in the three largest non-US markets
MarketMain suppliersCanada's shareMarket avg import priceCanada's US price vs marketCanada's price there now
GermanyItaly 37%, Poland 10%, Netherlands 8%<0.1%US$1.36/kg7% aboveToo little volume
MexicoUS 58%, China 8%, Spain 7%6%US$2.44/kg41% below9% above
FranceItaly 40%, Spain 17%, Germany 11%<0.01%US$1.23/kg18% aboveToo little volume

How to read the price columns

Canada's US price vs market compares what Canadian goods of this code sell for in the US per kilogram (US customs value, before international freight) with the average price per kilogram the market pays its other suppliers (usually including freight to its border). Fifteen percent or more below the average leaves room to absorb ocean freight and is shown in blue; 30 percent or more above means sales would rely on quality or specification and is shown in pink; in between, freight will squeeze margins and the gap does not move the score. It is not the price a buyer would pay for an identical item: one HS code covers products of different grades, and exchange rates have moved since 2024.

Canada's price there now is shown only where Canada already holds at least 1% of the market and US$500,000 of sales. Smaller flows are often samples, spare parts or one-off orders and give misleading prices.

UN Comtrade 2024, imports reported by each market and by the US. How the price gap works

What it costs to reach these markets

What moves the cost of selling into each market compared with selling to the US: the exchange rate, the import duty and the cost of freight and insurance, for Canada and for the main competitors. For comparison, freight and insurance on Canadian goods of this kind shipped to the US come to about 1.3% of their value.

Exchange-rate change, price gap at today's rate, import duties and freight in the three largest non-US markets
MarketCanadian goods since 2024Landed cost vs market (October 2026)Canada: dutyCanada: freight and insuranceMain competitors: duty, freight
GermanyEUR: 6% cheaper
About equal (+7%)
With trade remedies (worst case): 60% above
Canada +50% once the quota is used up
exchange rate -6.4%, freight +6.7%, duty +0% vs competitors +0%
0% + additional duty 50% above quota6.3% (US: 1.3%)
  • Italy: duty 0% (EU single market), freight not measured (inside the EU)
  • Poland: duty 0% (EU single market), freight not measured (inside the EU)
  • Netherlands: duty 0% (EU single market), freight not measured (inside the EU)
MexicoMXN: 2% cheaper
37% below
exchange rate -1.9%, freight +8%, before duty
0% under CUSMA (if the goods meet its rules of origin; other suppliers' duties not covered yet)7.4% (US: 1.3%)
  • US: duty not covered yet, freight 6.0%
  • China: duty not covered yet, freight 7.8%
  • Spain: duty not covered yet, freight 8.0%
FranceEUR: 6% cheaper
18% above
With trade remedies (worst case): 77% above
Canada +50% once the quota is used up
exchange rate -6.4%, freight +6.8%, duty +0% vs competitors +0%
0% + additional duty 50% above quota6.4% (US: 1.3%)
  • Italy: duty 0% (EU single market), freight not measured (inside the EU)
  • Spain: duty 0% (EU single market), freight not measured (inside the EU)
  • Germany: duty 0% (EU single market), freight not measured (inside the EU)

How to read this table

Canadian goods since 2024 shows how the Canadian dollar has moved against the market's currency between the 2024 average and the October 2026 average: "6% cheaper" means a price fixed in Canadian dollars now costs buyers there about 6% less than in 2024.

Landed cost vs market answers one question: if you shipped the goods you sell to the US today, at the same price, to this market, would they cost buyers more or less at the border than what they pay other suppliers? It starts from Canada's price per kilogram on US sales, adds freight and insurance to this market and Canada's import duty, applies the exchange-rate change since 2024, and compares the result with the market's average import price from other suppliers plus the duty they pay (weighted by their shares; zero inside the EU). The line under each figure shows the parts. Within 10% either way reads as about equal. Below the average means you can match local prices and still cover freight; above means you would need to sell on quality, specification or service, or accept a lower price than in the US. One HS code covers products of different grades, so a higher figure can also mean Canada sells a higher-value version. Where duties are not covered yet, both sides are compared before duty. Anti-dumping and similar duties apply only to some companies, tariff lines or quantities, so they are kept out of the main figure. Where Canada or a main competitor faces one, a second line shows the worst case: each origin pays its highest ad valorem remedy rate on top of its duty.

Duties are the lowest rate each origin can claim on the national tariff lines under this HS code, shown as a range where lines differ. Canada's rate assumes the goods meet the agreement's rules of origin (CETA in the EU, the Canada-UK agreement in the UK) and are declared with a valid origin statement; otherwise the MFN rate applies. Tariff quotas and end-use relief are not included. Anti-dumping and similar duties often apply only to some products or companies: check the exact line. In Mexico, goods that meet the CUSMA rules of origin enter duty free; we do not yet cover the duties Mexico charges other suppliers, so the landed cost there is compared before duty. Duties for other markets outside the EU and UK are not covered yet.

Freight and insurance is the OECD's estimate of what it cost in 2024 to move goods of this kind (HS heading 7306) from each supplier to the market, as a share of their value at the border. Compare Canada's figure with the US figure to see the extra cost of an overseas market, and with competitors' figures to see who is closer. These are averages across all shipments of the heading, not quotes: your own cost depends on volume, packaging, lane and season. Trade inside the EU is recorded without freight, so it is shown as not measured.

Sources: Bank of Canada exchange rates (CZK, PLN and IDR from ECB reference rates; SAR from its US dollar peg); European Commission, Access2Markets (TARIC data); UK Integrated Online Tariff (trade-tariff.service.gov.uk); OECD International Transport and Insurance Costs of merchandise trade (ITIC), 2024. Duties checked 2026-11-21. How we measure costs

Why it matters now

US tariff exposure
High

Welded steel pipe (7306.30) is a Section 232 steel article: 50% on full value, no CUSMA exemption. Not on the Section 338 list.

  • Section 232 (steel articles): 50% (all lines (heading 7306 listed as steel articles)). Source

US measures change often. Check current CBP guidance or a licensed customs broker before shipping.

Is the US still worth it?
It depends on what your US buyer will pay
  • US duty on goods that qualify under CUSMA: 50%.
  • To keep your US buyer's cost unchanged you would have to cut your price by about 33%.
  • Best alternative: Mexico. It pays other suppliers at least as much as Canada's US price, after freight and duty, even before the US tariff. Replacing 25% of Canada's US sales would take about 10% of Mexico's imports.
  • Held back to "it depends": the US duty here is Section 232, which most other suppliers to the US pay too, so US prices for this product tend to rise and the cut you need is likely smaller.

A rule of thumb, not advice: it assumes you sell in the alternative market at the price it pays other suppliers and ignores the cost of finding buyers there. The share of the tariff your US buyer will pay is something only you can know from your negotiations. How the threshold works

Step 1 · The market

How big is demand outside the US?

Imports of HS 730630 by every reporting country except the United States and Canada, in current US dollars.

Non-US imports, 2024
US$5.5bn
+5.5% a year since 2020
Step 2 · The buyers

Which countries import the most, and how much comes from Canada?

Largest non-US importers, 2024
MarketImportsFrom CanadaCanada's share
1Germany
US$645m
US$163k<0.1%
2Mexico
US$374m
US$23m6.1%
3France
US$289m
US$24k<0.01%
4Poland
US$274m
US$0k<0.0001%
5Netherlands
US$183m
US$1m0.58%
6UK
US$181m
US$90k<0.1%
7Czechia
US$170m
none reported0%
8Thailand
US$157m
US$5k<0.01%
9Spain
US$142m
none reported0%
10Italy
US$139m
US$12k<0.01%

What each market reports importing in 2024, in US dollars. "From Canada" includes Canadian goods shipped on through the US, so it can be higher than Canada's own export figures, such as the year-to-date sales at the top of the page, which count those goods as sales to the US.

Canada's slice of each market

Pink is the part supplied by Canada; the rest comes from other countries.

0.95%

Canada's combined share of these 10 markets (US$24m of US$2.6bn imported).

Where to look first: Market Fit

The same markets, ranked by how promising they look for Canadian sellers: size and growth of demand, trade agreements, Canada's existing sales, price, distance and room for volume. 5 promising, 1 hard. Pink points count against a market, blue for it.

  1. 1Mexico5/5 · Strong candidate
    • Takes 6.8% of non-US demand
    • Imports growing about 15% a year since 2020
    • Canadian free trade agreement in force (CPTPP, CUSMA)
    • Canada already supplies 6.1% of this market
    • Canada's US price is about 41% below what it pays others per kg
    • Close to Canada: about 3,300 km
  2. 2UK3/5 · Worth a look
    • Takes 3.3% of non-US demand
    • Imports growing about 14% a year since 2020
    • Canadian free trade agreement in force (Canada-UK TCA)
    • Canada supplies under 0.2% of this market
    • Price not compared: this market reports no import weights
    • Small next to Canada's US sales: a quarter of them would be 21% of its imports
  3. 3Germany3/5 · Worth a look
    • Takes 12% of non-US demand
    • Imports growing about 1.7% a year since 2020
    • Canadian free trade agreement in force (CETA)
    • Trade-remedy duty on Canadian goods (see the costs table)
    • Canada supplies under 0.2% of this market
    • Canada's US price is about 6% above what it pays others per kg
  4. 4Poland3/5 · Worth a look
    • Takes 5% of non-US demand
    • Imports growing about 7.6% a year since 2020
    • Canadian free trade agreement in force (CETA)
    • Trade-remedy duty on Canadian goods (see the costs table)
    • Canada supplies under 0.2% of this market
    • Canada's US price is about the same as what it pays others per kg
  5. 5Netherlands3/5 · Worth a look
    • Takes 3.3% of non-US demand
    • Imports growing about 6.6% a year since 2020
    • Canadian free trade agreement in force (CETA)
    • Trade-remedy duty on Canadian goods (see the costs table)
    • Canada supplies 0.6% of this market
    • Canada's US price is about 22% above what it pays others per kg
    • Small next to Canada's US sales: a quarter of them would be 21% of its imports
A starting point, not advice: it does not know your product's grade, buyers or rules beyond the EU and UK. How Market Fit works
Step 3 · Canada today

Canada's competitive position

Revealed comparative advantage
1.4

Above 1 means Canada specialises in it.

Non-US markets buying from Canada (2024)
44

Countries that reported imports from Canada.

Canada exports, Jan to Sep 2026
C$163m
-19.3% vs same period last year

Revealed comparative advantage (RCA) for Canada in HS 730630 is 1.4: this product makes up 1.4 times the share of Canada's exports that it makes up of world trade. Values above 1 indicate a specialisation. In 2024, 44 non-US markets reported imports of this product from Canada.

In Jan to Sep 2026, Canada exported C$163m of this product (-19.3% on the same period of the previous year), of which C$144m went to the United States. The largest non-US destinations were Mexico (C$13m), South Africa (C$1m), Chile (C$1m), Germany (C$1m).

Canada's exports by year

Navy goes to the United States; blue goes to every other market.

Canada's exports by year
YearTo the worldTo the USUS share
2025
US$173m
US$155m89%
2024
US$255m
US$237m93%
2023
US$294m
US$282m96%
2022
US$385m
US$373m97%
2021
US$338m
US$327m97%
2020
US$174m
US$166m96%
Step 4 · Before you ship

Tariffs and rules to check

Check product by product. Demand data shows where buyers are, not whether your specific product can enter a market. Rules, standards and certification differ by product, by market and over time. Use the official sources below and confirm with the importing country's authority or a licensed customs broker before you ship.

Regulatory intensity
High

Quota-limited access with a 50% out-of-quota duty in both the EU and UK, melt and pour proof, and EU and UK carbon border reporting.

Tariffs

Canadian-origin welded pipes of 7306 30 enter the EU at 0% within the steel tariff quotas (the EU third-country rate is also 0%) but pay 50% once the relevant quota is used up, and enter the UK at 0% only within the residual quota, with 50% out of quota under the UK steel trade measure. UK rates apply under the Canada-UK Trade Continuity Agreement. Preferential rates apply only when the goods meet the agreement's rules of origin and the origin statement is in order.

In the main buyer markets

  • CBAM: CN 7306 (other tubes, pipes and hollow profiles of iron or steel) is listed in Annex I of Regulation (EU) 2023/956, and CBAM's definitive regime applies from 1 January 2026; importers above the 50 tonne threshold set by Regulation (EU) 2025/2083 need emissions data. Source
  • Since 1 July 2026 Regulation (EU) 2026/1384 puts all CN 7306 30 lines under tariff quotas with a 50% out-of-quota duty that also applies to FTA partners, and importers must prove the country of melt and pour, for example with a mill test certificate. Source
  • Implementing Regulation (EU) 2026/1457 gives Canada no country-specific quota for gas pipes (category 20) or other welded pipes (category 26); Canadian pipe uses the FTA quota for other countries or the residual quota. Source
  • UK: under the steel trade measure in force since 1 July 2026, CN 7306 30 lines fall in categories 20 and 26 with a 50% out-of-quota tariff; Canada has no country quota and relies on the residual first come, first served quota. Source
  • UK CBAM takes effect from 1 January 2027 and HMRC lists heading 7306 as liable; importers must register once covered imports reach GBP 50,000 over a 12 month period. Source

Canadian requirements, exporting and importingOpen in the HS Code Checker →

No product-specific Canadian requirements found for this direction beyond the general ones below.

Applies to all goods (4)
  • CBSA
    Export declaration through CERS

    Commercial goods shipped to destinations other than the United States generally need an export declaration to the CBSA, filed through the CBSA's Canadian Export Reporting System (CERS); non-restricted commercial goods valued under CAD 2,000 are exempt.

    Official source
  • Global Affairs Canada
    Check the Export Control List

    Items on Canada's Export Control List need an export permit; the list is defined by technical description, not HS code. The current Guide to the ECL (January 2026 version) has been in force since 1 May 2026.

    Official source
  • Global Affairs Canada
    Re-exporting goods of US origin

    Export Control List item 5400 covers goods of US origin that are re-exported from Canada to countries other than the US without substantial further processing; check whether a permit or general permit applies.

    Official source
  • Global Affairs Canada
    Check Canadian sanctions by country and party

    Canada imposes sanctions under the Special Economic Measures Act and the United Nations Act on listed countries, entities and people (including Russia, Belarus, Iran and North Korea); screen the destination, buyer and supplier before any deal.

    Official source

Checked against official sources on Nov 21, 2026. A starting checklist, not legal advice: requirements depend on the exact goods, origin and destination. Confirm with the agency or your customs broker before you ship.

Government notices on HS 7306.30

  1. ·Finance CanadaIn forceImports into CanadaSome lines only
    Updated list of U.S. goods eligible for surtax relief

    Finance Canada expanded product-specific remission of U.S. counter-tariffs for certain described goods in short supply, and extended general relief for non-steel inputs used in Canadian manufacturing, processing and food packaging to June 30, 2028. Only the specific goods described in the Remission List qualify.

    Effective Nov 9, 2026Official notice
  2. ·Finance CanadaIn forceImports into Canada
    Counter-tariff on U.S. steel and aluminum goods raised to 50%

    The surtax on listed U.S.-origin steel and aluminum goods under the United States Surtax Order (Steel and Aluminum 2025) rose from 25% to 50% on September 8, 2026. It has applied since March 13, 2025.

    Effective Sep 8, 2026Official notice
  3. ·Global Affairs CanadaIn forceImports into Canada
    Import permits needed to use steel quota (Import Control List item 82)

    Importers must get a shipment-specific permit under item 82 of the Import Control List to bring in quota steel without the 50% surtax. Notice 1163 sets the quota quantities for June 28, 2026 to June 27, 2027.

    Effective Jun 28, 2026Ends Jun 27, 2027Official notice

Look up your exact case

Step 5 · Find suppliers

Where to find Canadian producers

Looking for a Canadian supplier of this product, or benchmarking competitors? These public directories let you search Canadian companies.

Suggested search terms:"steel pipe""welded tube""steel tubing""pipe mill"NAICS 331210
Over time

Edition history

How this product looked in each quarterly edition of the monitor.

This product in each edition
EditionCanada exports (YTD)US shareNon-US demandBrief
Q3 2026C$163m (Jan to Sep 2026)88%US$5.5bn (2024)Read
Next step

Need a second market for welded steel pipes?

Three ways we can help, depending on where you are in the decision.

Not sure a market is worth it?
Product Export Brief
CA$390, 5 business days

Our verdict on up to two markets you choose: worth a closer look, or a clear reason to rule it out now, with the codes, duties and rules behind it.

Order a brief
Picked a market and need buyers?
Buyer Leads
From CA$199, 5 business days

Names of companies importing 7306.30 goods in the market you choose, with their import activity and decision-maker contacts, as a report and CSV.

Find importers
Ready to commit and need a plan?
Custom Market Report
From CA$1,300, 5 to 10 business days

We will shortlist the three most promising markets beyond the US, starting from the largest importers (Germany, Mexico and France), with the rules to meet and a landed-cost comparison.

Request a study

Free guides: how to score a market and the real landed cost of exporting.

FAQ

Questions

How dependent are Canada's welded steel pipes exports on the United States?

In the Q3 2026 edition of the Canada Export Opportunity Monitor, 88% of Canada's exports of HS 730630 went to the United States (Jan to Sep 2026, Statistics Canada).

Which countries import the most welded steel pipes outside the US?

Outside the United States, the largest importers of HS 730630 in 2024 were Germany, Mexico, France. Total non-US imports were US$5.5bn (UN Comtrade).

What rules apply when exporting welded steel pipes from Canada?

Quota-limited access with a 50% out-of-quota duty in both the EU and UK, melt and pour proof, and EU and UK carbon border reporting. Requirements differ by product and market, so check the official sources linked on this page and confirm with the importing country's authority or a licensed customs broker before shipping.

Sources: UN Comtrade (2020 to 2024; Canada annual 2020 to 2025), Statistics Canada (Canada January to September 2026). Mirror statistics reported by importers can differ from Canada's own export figures. Values are in current dollars, so growth includes price changes. This page is general information, not legal or customs advice. See the methodology.

Free quarterly update

Get each new edition of the Export Opportunity Monitor

Once a quarter we refresh the data, add products and send a short brief on what changed for Canadian exporters. Free, no account needed.

All products in the monitor